GCC Technologies RX Series User Manual page 71

RX Series User Manual
Die Cut (Pen Page)
The Die Cut function can allow you to cut through the backing of the material. You can only use
the first 8 pen for this function. If you choose Pen No.1 and click the Die Cut function, the Pen
No.9 will become Pen No.1* for setting different parameter for the same cutting line. (Figure
4-24)
Figure 4-23 Figure 4-24
You can adjust the parameter such as force and length in both Pen No.1 and Pen No. 1* as you
need.
For example:
Figure 4-25
Pen No.1*: Cutting through the backing of the material
Pen No.1: Cutting through the vinyl only
Operation
4-15