Table of Contents
Advertisement
Available languages
Available languages
of the oven to zero position.
12.6 Programming the time of switching off
When the time of switching off is programmed and
the oven function selected, the oven is switched on
immediately.
Programming the time of switching off:
–
press
button,
–
using „+" and possibly „-" setting buttons set the
time of switching off the oven e.g. 11.50.
When the time set elapses:
–
the oven is switched off automatically,
–
sound signal is activated,
–
„
AUTO" pulsates on the programmer display.
If the dish is not baked sufficiently, you may repro-
gram the time of operation as in the point above, or
set the time of switching the oven off, or depress the
manual operation button
ration of the oven.
When the operation is over, move the functional knob
of the oven to zero position.
12.7 Automatic control
Operation in automatic mode consists in program-
ming the time of operation and time of switching off
the oven an in points 12.5 and 12.6.
The oven will be switched on automatically at the
time defined, and when the time set elapses it will
be switched off automatically.
Example - Roasting beef:
- it is 13.00
- roasting time 2 hours
- roasting temperature 220 0 C
- the dish to be prepared for 17.00
•
Put the meat into an oven-pan, add approx. 10
spoonfuls of water and cover it with a lid. Then
put the pan into the oven, place it on the mesh on
a chosen level, and close door of the oven.
•
Using the functional knob choose the position
, and using the thermoregulator knob set
the temperature of 220 0 C.
•
Press
button and using „+" and possibly „-"
setting buttons determine the roasting time i.e. 2
hours.
•
Press
button and using „+" and possibly „-"
setting buttons set the time of 17.00 (time when
roasting is complete).
Operation of the oven has be programmed and it will
be carried out automatically.
and control further ope-
At 15.00 the oven will be switched on automatically
and it will run for 2 hours. At 17.00 the appliance will
be switched off automatically which is signalled by
activation of the sound signal. At this time „AUTO"
pulsates and
is off.
If the dish is not roasted sufficiently, you may re-pro-
gram operation of the oven, or press the manual ope-
ration button
and control further roasting.
COMMENT !
1.
Pressing
button during operation of the
oven will enable you to display the program-
med time of switching off.
2.
When
button is depressed, the program-
med time of the oven operation is displayed.
If the oven has already started to run, the time
which is left to complete the program will ap-
pear.
12.8 Changing settings
Settings can be changed within the period up to 5s
from commencement of programming or after dele-
tion of the program.
Changing the time of operation:
–
press
button,
–
using „+" and „-" buttons you can set a new
time.
Changing the time of switching off:
–
press
button,
–
using „+" and „-" buttons you can set a new
time.
12.9 Deleting settings
Deleting the time of operation:
–
press
button,
–
press „-" button and hold it till the message „0.00"
appears on the display.
Changing the time of switching off:
–
press
button,
–
press „-" button and hold it till the message „0.00"
appears on the display.
When the program is deleted, operation of the oven
can be re-programmed.
12.10 Manual control
•
If during execution of the program the user in-
tends to start manual operation, the program
should be deleted and
pressed.
46
EN
button should be
Advertisement
Table of Contents
