Loading Paper Into Tray 1/2/3/4 - Konica Minolta bizhub 4750 User Manual

6.3

Loading paper into Tray 1/2/3/4

6.3 Loading paper into Tray 1/2/3/4
NOTICE
Individually feed paper into each tray to maintain balance of this machine. While loading paper into one tray,
close all other trays.
0 This section describes how to load paper into Tray 1. The method for loading paper into Tray 2/3/4 is
the same as for Tray 1.
0
Tray 2/3/4 is available when the optional Paper Feed Unit is installed.
1
Fully pull out Tray.
2
Hold the crosswise paper guide tab, then move the paper guide to match the size of the paper to be
loaded.
3
Hold the lengthwise paper guide tab, then move the paper guide to match the size of the paper to be
loaded.
% After moving the paper guide, slide the lock tab (3) to lock the paper guide. You can use the lock/un-
lock mark to check whether or not the paper guide is locked.
[Introduction]
6
6-8