Common Interface (Ci)/Smartcard Reader; Inserting The Hd+ Card In The Smartcard Reader - Kathrein UFS 925 Operating Instructions Manual

Always follow the operating instructions from your Pay-TV provider and the
instructions supplied with the Smartcard and the CA (Conditional Access) module!
Smartcards and CI modules are not included with this product!
The cards and modules are issued by the respective Pay-TV providers, and contain the subscriber
data and details of the channels for which the subscriber has paid. These channels are always
encrypted.
Contact the Pay TV provider if you are interested in subscribing to a particular Pay TV channel.
You are responsible for the use of the Smartcard in the CI module!
The Smartcard sold by the Pay TV provider, specifi c to a particular encryption technology,
is inserted into the CI module.
Store your card and PIN code securely when not in use!

Inserting the HD+ card in the Smartcard reader

The HD+ Smartcard is pre-inserted in the
Smartcard reader when supplied.
The Smartcard reader (small slot)
 
for the HD+ card . The Smartcard reader is on the front behind the fl ap on the right, underneath the
Common Interface (large slot). The Smartcard should be inserted (chip contacts pointing downwards)
into the Smartcard reader without exerting excessive force. Do not use excessive force and pay attention
to the manual supplied with the Smartcard.
48
Connection and set-up

Common Interface (CI)/Smartcard reader

 
on the UFS 925 (Nagravision embedded) is intended to be used

