Epg Views; Current" View - Kathrein UFS 925 Operating Instructions Manual

"Current" view

"Current" view

Press the (green) button to call up the
"Current" view in EPG. In the "Current"
view you can see all channels displayed
in the order of the complete channel list.
Provided that EPG data has been supplied
by tvtv or by the channel provider, the
receiver shows the current programme
running on each channel, with start time,
fi nish time, duration and progress bar.

Use the cursor ( ) buttons or the number pad to select the desired channel. Use the
view further information, if available, on the selected programme.
If you want to view the programme currently being shown on a channel, you need not exit the EPG,
just select the desired channel and press the
current TV picture for the selected channel. The picture however only appears once the
been pressed. Prior to this the picture from the old channel that had previously been selected is visible,
even though the EPG is no longer set to that channel.

The button allows you to look ahead to future programmes on the channels in 15-minute steps

(press the button to return to the current time).

By pressing the (green) button in the
"Current" view, you can display a schedule
in 15-minute steps (see screenshot on the
right). The desired time is selected using

the cursor ( ) buttons and confi rmed

using the button.
Electronic Programme Guide (EPG)

EPG views


button. At the top right of the screen you will see the

button to

button has
39