Table of Contents
Advertisement
After calling up the menu, you will see the
following on-screen display (example):
For insertion of CA module and
smartcard in the receiver's CI slot,
see Operating manual part 1 "Con-
nection and Start-Up", chapter enti-
tled "Common Interface (CI)".
Use the
buttons to select the CI slot you want and confi rm your selection with the
The receiver opens the menu generated by the module.
The screenshots below depend on the specifi c module and card and are therefore only intended
as examples.
The module on-screen displays may
appear in English even if you have
selected German as the menu lan-
guage for the receiver because the
menu is generated directly by the
module!
From this menu, your card and your PIN code will allow you to access various channels from your pay
TV provider.
"CryptoWorks" has been selected as an example here. The details may be different for each CA module.
Always follow the instructions supplied by your pay TV provider!
Multiple decryption
If your CA module is capable of decrypting multiple channels, you can press the
whether the module should only ever decrypt one channel (Off) or multiple channels simultaneously (On).
This function is optimised for "AlphaCrypt" modules and may lead to malfunctions with other modules.
If you select "Off", when making an unencrypted recording of an encrypted channel, unencrypted viewing of
other encrypted channels of the selected transponder is not possible at the same time with the CA module
used.
Main Menu - Interfaces
Common Interface (CI)
button.
buttons to select
127
Advertisement
Table of Contents
