Common Interface (Ci); Inserting The Smart Card And The Ca Module - Kathrein UFS 913 Operating Instructions Manual

The interface incorporated in the receiver is a CI interface, not a CI+ interface!
Always follow the operating instructions from your Pay-TV provider and the
instructions supplied with the Smartcard and the CA (Conditional Access) module!
Smart cards and CA modules are not included with this product!
The cards and modules are issued by the respective Pay-TV providers, and contain the
subscriber data and details of the channels for which the subscriber has paid. These
channels are always scrambled.
Contact the Pay TV provider if you are interested in subscribing to a particular Pay TV channel.
You are responsible for the use of the smart card in the CA!
The smart card sold by the Pay TV provider, specifi c to a particular encryption technology, is
inserted into the CA module.
Store your card and PIN code securely when not in use!

Inserting the smart card and the CA module

Inserting the CA module into the CI
The Common Interface (CI)
the front of the receiver (under the fl ap). The CA module
pointing upwards and towards the socket board) and is then inserted in the CI insert position
The smart card should be inserted into the CA module without exerting excessive force. This alsoapplies
to inserting the CA module into the CI slot!
Do not use without excessive force, and follow the instructions supplied with the Smartcard and the
CA module. To remove the CA module press the corresponding ejection button
out backwards.
Connection and set-up

Common Interface (CI)


of the UFS 913 is suitable for the use of two CA modules. It is located on

accepts the Smartcard
 
 

(chip contacts


and pull it straight
49
.