Common Interface (Ci)/Smartcard Reader; Inserting The Smartcard And The Ci Module - Kathrein UFS 924 Operating Instructions Manual

Always follow the operating instructions from your Pay-TV provider and the
instructions supplied with the Smartcard and the CA (Conditional Access) module!
Smartcards and CI modules are not included with this product!
The cards and modules are issued by the respective Pay-TV providers, and contain the
subscriber data and details of the channels for which the subscriber has paid. These channels
are always scrambled.
Contact the Pay TV provider if you are interested in subscribing to a particular Pay TV channel.
You are responsible for the use of the Smartcard in the CI module!
The Smartcard sold by the Pay TV provider, specifi c to a particular encryption technology, is
inserted into the CI module.
Store your card and PIN code securely when not in use!

Inserting the Smartcard and the CI Module

Inserting the CI module into the CI
The Common Interface (CI+)
on the front of the receiver (under the f ap). The CI module
pointing upwards and towards the socket board) and is then inserted in the CI+ insert position
Smartcard should be inserted into the CI module without exerting excessive force.
to inserting the CI module into the CI+ insert position.
Do not use excessive force and follow the instructions supplied with the Smartcard and the CI module.
To remove the CI module press the corresponding ejection button
46
Connection and setup

Common Interface (CI)/Smartcard reader


of the UFS 924 is suitable for the use of two CI modules. It is located

accepts the Smartcard

and pull it straight out backwards.



(chip contacts

. The
The same applies