Installation - Kenwood TK-250 Service Manual

INSTALLATION
DRESSING PANEL (ACCESSORIES)
1. Pee10ft the right-hand side ( the shorter section) of the
brown backing mate rial (
0 )
on the back side.
2. In the despression on the TK-250's top side, apply the
adhesive sheet (see Step
1.
above) from the left-hand
side, and align it properly. The sheet adhesive is very
strong, so please align carefully.
Press the exposed port ion of the adhesive surface firmly
into place (
f) ).
3. Pee10ft the remainder of the brown backing material
(@) )
on the back side and press (
0 )
the sheet onto the main
unit.
TK-250
4. Remove the backing material (
0 )
from the front si de
and press the dressing panel (
0 )
into place.
5