Kenwood TK-250 Service Manual page 6

TK-250
INSTALLATION
DTMF UNIT(KDM-7 Option) ATTACHMENT
METHOD
Keyboard attachment
1. Pee10ft the right-hand side ( the shorter section) of the
yellow backing material (
0 )
on the back side.
2. In the depession on the TK-250's top side, apply the
adhesive sheet ( see Step 1. above) from the left-hand
side, and align it properly. The sheet adhesive is very
strong, so please align carefully.
Press the exposed portion of the adhesive surface firmly
into place (@).
3. Pee10ft the remainder of the yellow backing material(
@) )
on the back side and press (
e )
the sheet onto the main
unit.
4. Remove the backing material (
(1) )
from the front side
and press the keyboard (
0 )
into place.
6