Installation Instructions - Kenwood TM-721A Instruction Manual

3. INSTALLATION INSTRUCTIONS
3-1. INSTALLATION
Mounting Bracket
When installing the transceiver in a vehicle consider the
ease of operation and safety when selecting the location
for the mounting bracket.
1. Install the bracket using
the supplied flat washers
2. Attach the transceiver
loosely using the SEMS
screws (4 pcs.).
3. The angle of the bracket
may be adjusted to any of
9 possible viewing angles.
Select the desired angle. Fig. 1
(Fig. 2)
4. Hold the transceiver in
place and tighten the 4
SEMS screws using a
wrench or.screwdriver.
To 144 MHz To 430 MHz
3-2. CONNECTIONS
3-2-1. Mobile Installations
The MA-40C0 dual band
. To 144 MHz antenna
antenna is recommended.
4 External Speaker(_]
The SP-40 or
» the SP-5OB is Oe
i recommended.
Duplexer
| To 430/440 MHz
antenna
Cautions:
Then replace with a new fuse of the same rating.