Kenwood TK-250 Service Manual page 15

TK-250
REALIGNMENT
8. User mode
In the user mode, the user uses the transceiver.
To enter this mode, switch the power on in the use mode .
• Initial state
Function/state
Power on Initial value
Receive
+-
Backup
Lowest channel memorized OFF
+-
OFF
+-
Backup
Each CH setting
OFF
+-
Backup
Al! channels DEL
Backup
OFF
• Functions
Encoder
MONI
TA
DIA
: Channel up/down
: MONI on/off
: The talkaround is turned on or off each time
the key is pressed.
: Scan delete/add change
1) Talkaround
The talkaround function is used to transmit data with the
receive frequency and receive signaling. The talkaround is
turned on or off each time the
[TA]
key is pressed. It does
not work during scanning. The talkaround is turned off if the
channel is changed with the encoder or if scanning starts.
The talkaround function can be selected in the self program-
ming mode(function setting mode) .
r
Talkaround off ~
.j
Talkaround on ~
Mode
Function
Transmit with the transmit frequency and transmit signaling. Transmit with the receive frequency and receive signaling.
15