Install Software With Autoinstall - Honeywell ScanPal EDA61K Series User Manual

Install Software with AutoInstall

Important: The EDA61K must have power for the entire length of the install process or it could
become unstable. Do not attempt to remove the battery during the process.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the toggle button to turn Provisioning mode On.
4. Save the upgrade file (*.zip or *.apk) in one of the following folders on the
5. Swipe up from the bottom of the Home screen to access all apps.
6. Tap AutoInstall Settings
7. Tap Packages Update from the AutoInstall Settings screen.
8. Once installation is complete, turn Provisioning mode Off.
Note: Some updates do not require the computer to reboot before installation.
Optional microSD Card Method
The EDA61K comes equipped with a microSD card socket. You can install an
upgrade from a microSD card you insert in the computer.
Important: The EDA61K must have power for the entire length of the install process or it could
become unstable. Do not attempt to remove the battery during the process.
1. On the EDA61K, swipe up from the bottom of the Home screen to access all
2. Tap Settings
3. Tap the toggle button to turn Provisioning mode On.
4. Tap AutoInstall Settings
5. Press and hold the Power button, and then tap Power off.
72
> Honeywell Settings > Provisioning mode.
EDA61K mobile computer:
• Internal shared storage\honeywell\autoinstall
Software upgrades saved to this folder for installation, do not persist when a
Full factory reset is performed.
IPSM card\honeywell\autoinstall
•
Software upgrades saved to this folder, do not persist when a full factory
reset is performed.
If required by the app, the computer may automatically initiate a reboot before
starting the installation process. When the installation is finished, a message
appears or the unit finishes rebooting and the lock screen appears.
apps.
> Honeywell Settings > Provisioning mode.
and verify AutoInstall is enabled
. Verify AutoInstall is enabled
ScanPal EDA61K Mobile Computer
.
.