PROGRAMMING USING THE DISPLAY
Accessing the second menu level
Doses setting
Select within 30s
fig. 06
Set clock
fig. 07
Setting the clock: hours, minutes and day
Clock adjust
hh:mm Day
fig. 08
With the machine on, press the Continuous Dispensing button
the Left-hand drink buttons and hold it down (for over 8 seconds) until
the dose-programming menu is displayed. All the drink buttons lights
will be turned on and the Continuous Dispensing button light will flash. The
display will be as shown in fig. 06.
Hold down the Continuous Dispensing button
displays the "set clock" option (see fig. 07).
This provides access to the second menu level.
To set the clock, press the 2 Short Espressos button
clock" message is displayed.
The hours values will start flashing. Increase/decrease the values by
pressing the 1 Short Espresso
(see fig. 08).
With the desired value is reached, accept it the pressing the 2 Short
Espressos button
The minutes digits will now start flashing. Increase/decrease the values by
pressing the 1 Short Espresso
With the desired value is reached, accept it the pressing the 2 Short
Espressos button
Set the day of the week in the same way (
After setting the values, pressing the 2 Short Espressos button
accesses the auto On/Off menu.
and 1 Long Espresso
.
and 1 Long Espresso
.
Rosetta Capsule Group
on
until the menu
whilst the "Set
buttons
buttons.
,
and
).
29
Need help?
Do you have a question about the ROSETTA CAPSULE GROUP and is the answer not in the manual?