Brother HL-4150CDN User Manual page 83

Control Panel
Color Correction
Submenu
Frequency
ColorCalibration
Auto Regist.
Manual Regist.
The factory settings are shown in Bold with an asterisk.
Direct Print
Submenu
Paper Size
Media Type
The factory settings are shown in Bold with an asterisk.
Menu Selections Options
Normal*/Low/Off
Calibrate
Reset
Registration
Print Chart
Set Registration 1 Magenta Left
2 Cyan Left
3 Yellow Left
4 Magenta Center
5 Cyan Center
6 Yellow Center
7 Magenta Right
8 Cyan Right
9 Yellow Right
Menu Selections Options
Letter/Legal/A4*/
Executive/JIS B5/B5/
A5/A5 L/JIS B6/B6/A6/
Folio/16K(195x270mm)/
16K(184x260mm)/
16K(197x273mm)
Plain Paper*/
Thick Paper/
Thicker Paper/
Thin Paper/
Recycled Paper/
Bond Paper/
Glossy Paper
Descriptions
Sets the interval time you want to
carry out the auto colour correction
Carries out calibration to revise the
colours. (See Color Calibration
on page 79.)
Sets the calibration parameters back
to the default settings. (See Color
Calibration on page 79.)
Adjusts the print position of each
colour automatically. (See Auto
Registration on page 80.)
Prints the chart to manually check
the registration of the colours. (See
Manual Registration on page 80.)
Enter the correction value on the
chart you printed from the
Print Chart. (See Manual
Registration on page 80.)
Descriptions
Sets the size of paper for direct print.
Sets the type of paper for direct print.
3
77