Brother HL-4150CDN User Manual page 82

Control Panel
Network for HL-4570CDW users (continued)
Submenu 1 Submenu 2
WLAN Status
(Appears only
when WLAN
Enable is On.)
MAC Address
Set to Default Restores wireless network settings of the internal print server to the factory default.
WLAN Enable
Restores all network settings of the internal print server to the factory default.
Network R
eset
The factory settings are shown in Bold with an asterisk.
1
### means a number within the range of 000 to 255. On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt
to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA
IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you will need to manually
enter an IP address from the machine's control panel.
Reset Menu
Display Shows
Network
Reset Printer
Factory Reset
The factory settings are shown in Bold with an asterisk.
Menu Selections
Status
Signal
Channel
Speed
SSID
Comm. Mode
Description
Restores all network settings of the internal print server to the factory default.
Resets the machine and restores all printer settings (including command settings) to
settings you have previously made with the control panel buttons.
Resets the machine and restores the printer settings (including command settings) to the
factory default settings.
Options
Ad-hoc*/Infrastructure Shows the current
Off*/On
Descriptions
Shows wireless Ethernet link
status.
Shows the signal condition
when Status is Active.
Shows the channel in use
when Status is Active.
Shows the connecting speed
when Status is Active.
Shows SSID [uses a maximum
of 32 digits and characters 0-9,
a-z and A-Z in ASCII values]
Communication Mode.
Shows MAC address of the
machine.
Turns the wireless interface on
or off.
3
76