Brother HL-4150CDN User Manual page 80

Control Panel
Network for HL-4570CDW users
Submenu 1 Submenu 2
Wired LAN TCP/IP
Ethernet
Wired Status
MAC Address
Set to Default Restores wired network settings of the internal print server to the factory default.
Wired Enable
The factory settings are shown in Bold with an asterisk.
Menu Selections Options
Boot Method Auto*/Static/RARP/
BOOTP/DHCP
IP Address ###.###.###.###
(000.000.000.000)*
Subnet Mask ###.###.###.###
(000.000.000.000)*
Gateway ###.###.###.###
(000.000.000.000)*
IP Boot Tries 0/1/2/3*.../32767
APIPA On*/Off
IPv6 Off*/On
Auto*/100B-FD/100B-HD/
10B-FD/10B-HD
Active 100B-FD/
Active 100B-HD/
Active 10B-FD/
Active 10B-HD/
Inactive/Wired OFF
On*/Off
Descriptions
Chooses the IP method that
best suits your needs.
Enter the IP address.
1
Enter the Subnet mask.
1
Enter the Gateway address.
1
Specifies the number of setting
trials when the Boot Method
allows automatic IP setting.
Automatically allocates the IP
address from the link-local
1
address range.
Sets use of IPv6 protocol.
Chooses Ethernet link mode.
Shows Ethernet link status.
Shows MAC address of the
machine.
Chooses Ethernet link mode.
3
74