Brother HL-4150CDN User Manual page 60

Driver and Software
Color Mode

You can change the colour mode as follows:
• Normal
This is the Default colour mode.
• Vivid
The colour of all elements are adjusted to become a more vivid colour.
• None
 Enhance Black Printing
If a black graphic cannot be printed correctly, choose this setting.
 Improve Gray Color
You can improve the image quality of shaded areas by selecting the Improve Gray Color check box.
 Skip Blank Page
If Skip Blank Page is checked, the printer driver automatically detects blank pages and excludes them
from printing.
 Improve Print Output...
This feature allows you to improve a print quality problem.
• Reduce Paper Curl
If you choose this setting, the paper curl may be reduced.
If you are printing only a few pages, you do not need to choose this setting. We recommend that you
change the printer driver setting in Media Type to a thin setting.
Note
This operation makes the temperature of the machine's fusing process lower.
• Improve Toner Fixing
If you choose this setting, the toner fixing on paper may be improved. If this selection does not provide
enough improvement, change the printer driver setting in Media type to a thick setting.
Note
This operation makes the temperature of the machine's fusing process higher.
 Sleep Time
When the machine does not receive data for a certain period of time, it enters sleep mode. In sleep mode,
the machine acts as though it were turned off. When you choose Printer Default, the timeout setting will
be reset to the specific time set at the factory; this can be altered in the driver or at the machine. If you
want to change the sleep time, choose Manual and then enter the time in the text box on the driver.
While the machine is in sleep mode, the LCD shows Sleep, but the machine can still receive data.
Receiving a print file or document or pressing Go will automatically wake up the machine to start printing.
2
54