Brother HL-4150CDN User Manual page 43

Driver and Software
Other Print Options
You can set the following in Printer Function:
 Color Calibration
 Use Reprint
 Sleep Time
 Improve Print Output
 Skip Blank Page
Color Calibration
The output density of each colour may vary depending on the temperature and humidity of the environment
the machine is in. This setting helps you to improve colour density by letting the printer driver use the colour
calibration data stored in your machine.
 Use Calibration Data
If you check this box, the printer driver will use the calibration data retrieved from the machine to set colour
matching in the printer driver to ensure consistent print quality.
 Start Color Calibration...
If you click this button, your machine will start colour calibration and then the printer driver will attempt to
get the calibration data from your machine.
 Get Device Data Automatically
If you check this box, the printer driver will automatically get the colour calibration data from your machine.
Note
If you print by using the Direct Print feature or BR-Script printer driver, you need to perform the calibration
from the control panel. See Color Calibration on page 79.
Use Reprint
The machine keeps the print job sent to it in memory.
You can reprint the last job without sending the data again from your computer. For more information about
the Reprint function, see Reprinting documents on page 66.
Note
If you want to prevent other people from printing your data using the reprint function, uncheck the
Use Reprint check box.
Sleep Time
When the machine does not receive data for a certain period of time, it enters sleep mode. In sleep mode,
the machine acts as though it were turned off. When you choose Printer Default, the timeout setting will be
reset to the specific time set at the factory; this can be altered in the driver or at the machine.
Intelligent Sleep Mode automatically adjusts to the most suitable timeout setting depending on the frequency
of your machine use.
2
2
2
2
2
37