Printing Secure Data - Brother HL-4150CDN User Manual

Control Panel

Printing Secure data

Secure data
Secure documents are protected by a password and only those people who know the password will be able
to print the document. The machine will not print the document when you send it for printing. To print the
document, you must use the control panel of the machine (with the password). Secure data will be deleted
after it is printed once.
When the area to spool data is full, the LCD shows Out of Memory. Press Cancel to return to the Ready
state.
If you want to delete the spooled data, you can carry out this operation using the control panel or the
Web based management application.
Note
• Secure data will be deleted when the machine is turned off.
• If you wait 30 seconds to continue the control panel operation, the LCD leaves the Secure Print setting
automatically.
• For more information about the settings in the printer driver and how to create secure data, see
Secure Print on page 35 (For Windows
BR-Script printer driver) or Secure Print on page 51 (For Macintosh printer driver).
How to print Secure data
a
Press Secure.
b
Press + or - to choose the user name. Press OK.
c
Press + or - to choose the job. Press OK.
d
Press + or - to enter your password. Press OK.
e
Press + or - to choose Print. Press OK.
f
Press + or - to enter the number of copies you want.
g
Press OK or Go.
How to access the menu mode
a
Press any of the Menu buttons (+, -, OK or Back) to take the printer offline.
b
Scroll through each menu level by pressing + or - for the direction you want.
c
Press OK when the option you want appears on the LCD.
The LCD will then show the next menu level.
d
Press + or - to scroll to your next menu selection.
e
Press OK or Go.
When you have finished setting an option, the LCD will show Accepted.
®
printer driver), Advanced options on page 43 (For Windows
3
3
3
®
3
67