Brother HL-4150CDN User Manual page 79

Control Panel
Network for HL-4150CDN users
Submenu
TCP/IP
Ethernet
Status
MAC Address
Network Reset
The factory settings are shown in Bold with an asterisk.
1
### means a number within the range of 000 to 255. On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt
to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA
IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you will need to manually
enter an IP address from the machine's control panel.
Menu Selections Options
Boot Method Auto*/Static/RARP/
BOOTP/DHCP
IP Address ###.###.###.###
(000.000.000.000)*
Subnet Mask ###.###.###.###
(000.000.000.000)*
Gateway ###.###.###.###
(000.000.000.000)*
IP Boot Tries 0/1/2/3*.../32767
APIPA On*/Off
IPv6 Off*/On
Auto*/100B-FD/100B-HD/
10B-FD/10B-HD
Active 100B-FD/
Active 100B-HD/
Active 10B-FD/
Active 10B-HD/
Inactive
Restores all network settings of the internal print server to the factory default.
Descriptions
Chooses the IP method that best
suits your needs.
Enter the IP address.
1
Enter the Subnet mask.
1
Enter the Gateway address.
1
Specifies the number of setting trials
when the Boot Method allows
automatic IP setting.
Automatically allocates the IP
address from the link-local address
1
range.
Sets use of IPv6 protocol.
Chooses Ethernet link mode.
Shows Ethernet link status.
Shows MAC address of the machine.
3
73