Installing Extra Memory - Brother HL-4150CDN User Manual

Hide thumbs Also See for HL-4150CDN:
Table of Contents

Advertisement

Option

Installing extra memory

Note
Always turn off the machine power switch before installing or removing the SO-DIMM.
a
Turn off the machine power switch, and then unplug the machine. Disconnect all interface cables from
the machine.
b
Remove the plastic (1) and then the metal (2) SO-DIMM covers.
c
Unpack the SO-DIMM and hold it by its edges.
IMPORTANT
To prevent damage to the machine from static electricity, DO NOT touch the memory chips or the board
surface.
d
Hold the SO-DIMM by the edges and align the notches in the SO-DIMM with the protrusions in the slot.
Insert the SO-DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2).
2
1
2
4
1
84
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hl-4570cdw

Table of Contents