GigE FC11000GE Instruction Manual page 5

11 megapixel progressive scan monochrome/color camera
Table of Contents

Advertisement

(3-4) Mode switch (MODE)
The Operation mode and Gain can be set by manipulating Mode switch and UP/DOWN switch.
(3-5) Shutter switch (EXP.)
The shutter speed (shutter exposure time) can be set by manipulating Shutter switch.
(3-6) UP/DOWN switch (U-D)
The Operation mode and Gain can be set by manipulating Mode switch and UP/DOWN switch.
(3-7) LAN connector (Standard type RJ-45 connector)
This is the LAN connector (RJ-45 type) conforming to Gigabit Ethernet interface (1000BASE-T/IEEE802.3ab).
It is connected with the LAN connector of PC using standard LAN cable(CAT-5e or CAT-6) conforming to Gigabit Ethernet.
[Pin arrangement of LAN connector (RJ-45)]
Pin No.
Signal name
1
TP0+
2
TP0-
3
TP1+
4
TP2+
5
TP2-
6
TP1-
7
TP3+
8
TP3-
When using this equipment on a place subject to constant vibration or impact, it is recommended to employ a screw lock type
LAN cable. Firmly screw a locking screw into a connector fixing screw hole when using a screw lock type cable.
(3-4) Display LED
Three indicator LEDs are laid on the rear panel
・Operation indicator LED (POW: Three colors: green/red/orange)
It lights up (or brinks ) to indicate that the camera is powered.
When the camera is set in the asynchronous shutter mode, It lights up in red
in response to the input of the external trigger signal.
・Link speed indicator LED (SPD: orange)
It lights up in orange to indicate that the camera is connected to LAN port (LAN card) or HUB of Gigabit Ethernet
Interface (1000BASE-T).
It turns off when the camera is connected to LAN port (100BASE-T, 10BASE-T) of which communication speed is lower than
1000BASE-T or when the camera is connected to nothing.
・Link status indicator LED (LINK: green)
It lights up when the camera is connected to the other LAN port via Ethernet and the data-access is running as well.
Name
Color
SPD
Orange
Disconnected from LAN
or Connecting at 10Mbps/100Mbps
LINK
Green
Disconnected from LAN
Description
Twisted pair 0 (+)
Twisted pair 0 (-)
Twisted pair 1 (+)
Twisted pair 2 (+)
Twisted pair 2 (-)
Twisted pair 1 (-)
Twisted pair 3 (+)
Twisted pair 3 (-)
OFF
Connecting at 1000Mbps
Connected to LAN
- 5 -
I/O
In/Out
In/Out
In/Out
In/Out
In/Out
In/Out
In/Out
In/Out
ON
-
Data accessing
K09821;5/37
Blinking

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs11000ge

Table of Contents