Image Display Software And Api Terms - GigE FC11000GE Instruction Manual

9. Image Display Software and API terms

It can display the image on the PC monitor and can save the image data by connecting the equipment to PC via Ethernet and
by using image display software (Coyote) of the attached SDK.
Refer to the contents of "Instruction manual of FC-FG series camera (Connection edition)" about how to use the Display software
("Coyote" and "GEVPlayer")
This equipment meets GenICam API established by EMVA (European Machine Vision Association).
The Feature(Item) and that content of GenICam API are described below.
Feature (Item)
<AcquisitionAndTriggerControls>
AcquisitionMode
AcquisitionStart
AcquisitionStop
AcquisitionFrameCount
ExposureMode
ExposureTimeRaw
ExposureTimeAbs
ExposureTimeLowRaw
ExposureTimeLowAbs
TriggerSoftware
PresetShutter
<ImageSizeControl>
SensorWidth
SensorHight
Width
Height
WidthMax
HeightMax
OffsetX
OffsetY
SensorDigitizationTaps(EX)
PixelFormat
<AnalogControls>
GainRaw
BlackLevelRaw
Content (Set value)
Sets the acquisition mode of the device.
Continuous :Frames are captured continuously.
Single Frame :One frame is captured.
Multi Frame :The number of frames specified by AcquisitionFrameCount is captured.
Starts the Acquisition of the device.
Stops the Acquisition of the device.
Sets the number of frames to acquire in MultiFrame Acquisition mode.(1 to 255)
Sets the operation mode of the Exposure (or shutter).
Off : No shutter operation (The exposure time is one frame time).
Timed : Continuous shutter operation with the specified exposure duration time(
TriggerWidth : Asynchronous shutter operation in pulse width control mode.
TriggerControlled : Preset asynchronous shutter operation with the specified exposure
duration time(
Timed Low : Continuous Low speed shutter operation with the specified exposure
duration time(
1...The exposure time is set by the ExposureTimeRaw,the ExposureTimeAbs or by
※
Preset 0 to 9.
2...The exposure time is set by the ExposureTimeLowRaw,the ExposureTimeLowAbs or
※
by Preset0 to 9.
Sets the Exposure time in H unit (Horizontal synchronization time).
Sets the Exposure time in microseconds.
Sets the Law speed shutter Exposure time in V unit (Vertical synchronization time).
Sets the Law speed shutter Exposure time in milliseconds.
Trigger signal is generated by software.(Internal trigger is generated when "1" is given.)
Sets the Exposure time with Preset value.
Shutter SW : Exposure time is set by the shutter SW of the camera.
Preset0 : Specifies Preset value 0(Shutter exposure time is OFF only.)
Preset1 : Specifies Preset value 1
....
Preset9 : Specifies Preset value 9
Exposure Time : Exposure time is specified by ExposureTimeRaw or ExpposureTimeAbs
Effective width of the sensor in pixels. (4008)
Effective height of the sensor in pixels.(2672)
Width of the Image provided by the device (in pixels).(8 to WidthMax)
Height of the image provided by the device (in pixels).(1 to HeightMax)
Maximum width (in pixels) of the image. (4008)
Maximum height (in pixels) of the image. (2672)
Horizontal offset from the origin to the AOI (in pixels). (0 to (WidthMax-Width)) inc=2
Vertical offset from the origin to the AOI (in pixels). (0 to (HeightMax-Height)) inc=2
Number of taps for image output.
Sets the output format (gray level) of the image.
Mono8 (FC11000GE) ／ BayerRG8 (FS11000GE) ： Output in 8bit format
Mono10 (FC11000GE) ／ BayerRG10 (FS11000GE) ： Output in 10bit format
Mono12 (FC11000GE) ／ BayerRG12 (FS11000GE) ： Output in 12bit format
Sets the gain set value in MGC mode.
Sets the black level (Image offset level)
1).
※
2).
※
(One)
(0 to 255)
(0 to 255)
- 34 -
K09821;34/37
Read/
Write
R/W
C
C
R/W
R/W
1).
※
(1 to 2721) R/W
(201.99 to 193023) R/W
R/W
(1 to 50)
(192.98 to 9649) R/W
C
R/W
R
R
R/W
R/W
R
R
R/W
R/W
R
R/W
R/W
R/W