Fronius Primo 3.0-1 Operating Instructions Manual page 28

26
The current time appears.
(HH:MM:SS, 24-hour clock),
the 'tens' digit for the hour will flash.
Use the 'Up' and 'Down' keys to select
5
a value for the 'tens' digit for the hour
Press the 'Enter' key
6
The 'units' digit for the hour will flash.
Repeat steps 5 and 6 for the 'units'
7
digit for the hour, for the minutes and
seconds until...
the set time starts flashing.
Press the 'Enter' key
8
The time is applied and the overview of
values that can be changed is displayed.
Press the 'Esc' key
4
The 'Time / Date' item on the Setup menu
appears.