Fronius Primo 3.0-1 Operating Instructions Manual page 18

1
2
3
The inverter establishes the WLAN access point. The WLAN access point remains open
for 1 hour.
Installation using the Solar.web App
The Setup wizard start page is displayed.
16
Connect inverter with Fronius Datamanager 2.0 or Fronius Datamanager Box 2.0 to
the Fronius Solar Net
When networking several inverters together in Fronius Solar Net:
Set the Fronius Solar Net master / slave switch on the Fronius Datamanager 2.0 plug-
in card correctly
- One inverter with Fronius Datamanager 2.0 = master
- All other inverters with Fronius Datamanager 2.0 = slave (the LEDs on the Fronius
Datamanager 2.0 plug-in cards are not illuminated)
Switch the device into service mode
- Activate the WLAN access point via the Setup menu on the inverter
S t a n d b y
W i F i A c c e s s P o i n t
D A T C O M
U S B
C l o c k
Download the Fronius Solar.web App
4
Run the Fronius Solar.web App
5
Installation using a web browser
Connect the end device to the WLAN
4
access point
SSID = Fronius_240.xxxxx (5-8 dig-
its)
- Search for a network with the
name "Fronius_240.xxxxx"
- Establish a connection to this
network
- Enter password 12345678
(or connect the end device and invert-
er using an Ethernet cable)
Entry in browser:
5
http://datamanager
or
192.168.250.181 (IP address for
WLAN connection)
or
169.254.0.180 (IP address for LAN
connection)