Esd Precautions - AXIOMTEK SBC82621 User Manual

Integrated circuits on computer boards are sensitive to static
electricity. To avoid damaging chips from electrostatic
discharge, observe the following precautions:
Do not remove boards or integrated circuits from their anti-static
packaging until you are ready to install them.
Before handling a board or integrated circuit, touch an unpainted
portion of the system unit chassis for a few seconds. This helps to
discharge any static electricity on your body.
Wear a wrist-grounding strap, available from most electronic
component stores, when handling boards and components.
Trademarks Acknowledgments
AXIOMTEK is a trademark of AXIOMTEK Co., Ltd.
IBM is a registered trademark of International Business
Machines Corporation.
MS-DOS, and Windows '95/98/NT/2000/XP/ME are trademarks
of Microsoft Corporation.
Award is a trademark of Award Software, Inc.
IBM, PC/AT, PS/2, VGA are trademarks of International
Business Machines Corporation.
Intel, Pentium, Pentium II, Pentium III and Celeron are
trademarks of Intel Corporation.
VIA is a trademark of VIA Technologies , Inc.
S3 is a trademark of S3 Graphics , Inc
Realtek RTL-8100C/RTL-8110S is registered trademark of
Realtek Semiconductor Corporation.
Other brand names and trademarks are the properties and
registered brands of their respective owners.

ESD Precautions

iii