Mac Filter - ZyXEL Communications WAP3205 v2 User Manual

10.6 MAC Filter

The MAC filter screen allows you to configure the WAP3205 v2 to give exclusive access to devices
(Allow) or exclude devices from accessing the WAP3205 v2 (Deny). Every Ethernet device has a
unique MAC (Media Access Control) address. The MAC address is assigned at the factory and
consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know
the MAC address of the devices to configure this screen.
To change your WAP3205 v2's MAC filter settings, click Network > Wireless LAN > MAC Filter.
The screen appears as shown.
Figure 61 Network > Wireless LAN > MAC Filter
The following table describes the labels in this menu.
Table 36 Network > Wireless LAN > MAC Filter
LABEL
Access Policy
SSID
Policy
Add a station
Mac Address
MAC Filter Summary
Delete
MAC Address
Apply
Cancel
Chapter 10 Wireless LAN
DESCRIPTION
Select the SSID for which you want to configure MAC filtering.
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Disable to deactivate the MAC filtering rule you configure below.
Select Allow to permit access to the WAP3205 v2, MAC addresses not listed will be denied
access to the WAP3205 v2.
Select Reject to block access to the WAP3205 v2, MAC addresses not listed will be allowed to
access the WAP3205 v2
Enter the MAC addresses of the wireless station that are allowed or denied access to the
WAP3205 v2 in these address fields. Enter the MAC addresses in a valid MAC address format,
that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Click the delete icon to remove the MAC address from the list.
This is the MAC address of the wireless station that are allowed or denied access to the
WAP3205 v2.
Click Apply to save your changes back to the WAP3205 v2.
Click Cancel to reload the previous configuration for this screen.
WAP3205 v2 User's Guide
86