Navigation Panel - ZyXEL Communications WAP3205 v2 User Manual

Table 4 Status Screen: Access Point Mode
LABEL
CPU Usage
Memory Usage
System Setting
Configuration Mode
Summary
Packet Statistics
WLAN Station Status

3.5.1 Navigation Panel

Use the menu in the navigation panel to configure WAP3205 v2 features in Access Point mode.
The following screen and table show the features you can configure in Access Point mode.
Figure 8 Menu: Access Point Mode
The following table describes the sub-menus.
Table 5 Navigation Panel: Access Point Mode
LINK
Status
MONITOR
Log
Packet Statistics
WLAN Station
Status
CONFIGURATION
Network
Chapter 3 Access Point Mode
DESCRIPTION
This displays what percentage of the WAP3205 v2's processing ability is currently used.
When this percentage is close to 100%, the WAP3205 v2 is running at full load, and the
throughput is not going to improve anymore. If you want some applications to have more
throughput, you should turn off other applications (for example, using bandwidth
management.
This shows what percentage of the heap memory the WAP3205 v2 is using.
This shows the web configurator mode you are viewing - Expert.
Click Details... to go to the Monitor > Packet Statistics screen
Use this screen to view port status and packet specific statistics.
Click Details... to go to the Monitor > WLAN Station Status screen
74). Use this screen to view the wireless stations that are currently associated to the
WAP3205 v2.
TAB FUNCTION
This screen shows the WAP3205 v2's general device, system and interface
status information. Use this screen to access the wizard, and summary
statistics tables.
Use this screen to view the list of activities recorded by your WAP3205 v2.
Use this screen to view port status and packet specific statistics.
Use this screen to view the wireless stations that are currently associated
to the WAP3205 v2.
WAP3205 v2 User's Guide
19
(Section 9.4 on page 73).
(Section 9.5 on page