Wpa(2)-Psk; Site Survey Screen - ZyXEL Communications WAP3205 v2 User Manual

5.7.3 WPA(2)-PSK

Figure 23 Universal Repeater Mode: Wireless LAN > Universal Repeater: WPA(2)-PSK
The following table describes the labels in this screen.
Table 18 Universal Repeater Mode: Wireless LAN > Universal Repeater: WPA(2)-PSK
LABEL
Universal Repeater Parameters
Enable
SSID
MAC Address
(Optional)
Channel Selection
Security Mode
Encryption Type
Pre-Shared Key
Apply
Cancel

5.8 Site Survey Screen

Use this screen to scan for and connect to a wireless network automatically. Go to Configuration >
Wireless LAN > Site Survey to open the following screen.
Chapter 5 Universal Repeater Mode
DESCRIPTION
Select this option to have the WAP3205 v2 connect to the specified access point.
Enter the name of the access point to which you are connecting.
Enter the MAC address of the access point to which you are connecting.
Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box. The options vary depending on the
frequency band and the country you are in.
Select WPA-PSK or WPA2-PSK if the access point to which you want to connect uses
WPA-PSK or WPA2-PSK.
Select the type of wireless encryption employed by the access point to which you want to
connect.
WPA-PSK or WPA2-PSK uses a simple common password for authentication.
Type the password employed by the access point to which you want to connect.
Click Apply to save your changes back to the WAP3205 v2.
Click Cancel to reload the previous configuration for this screen.
WAP3205 v2 User's Guide
39