Wps Screen - ZyXEL Communications WAP3205 v2 User Manual

Figure 16 Client Mode: Wireless LAN > Site Survey
The following table describes the labels in this screen.
Table 12 Client Mode: Wireless LAN > Site Survey
LABEL
Station Site Survey
#
SSID
BSSID
Signal Strength
Channel
Encryption
Authentication
Network Type
Rescan
Add Profile

4.8 WPS Screen

Use this screen to enable Wi-Fi Protected Setup (WPS) on the WAP3205 v2. Go to Configuration >
Wireless LAN > WPS to open the following screen.
Chapter 4 Client Mode
DESCRIPTION
Select a wireless device and click Add Profile to open a configuration screen where you
can add the selected wireless device to a profile and then enable it.
This displays the SSID of the wireless device.
indicates the wireless device is added to an activated profile and the WAP3205 v2 is
connecting to it.
This displays the MAC address of the wireless device.
This displays the strength of the wireless signal. The signal strength mainly depends on the
antenna output power and the distance between your WAP3205 v2 and this device.
This displays the channel number used by this wireless device.
This displays the data encryption method used by this wireless device.
This displays the authentication method used by this wireless device.
This displays the network type (Infrastructure or Ad Hoc) of this wireless device.
Click this button to search for available wireless devices within transmission range and
update this table.
Select a wireless device and click this button to add it to a profile.
WAP3205 v2 User's Guide
29