What You Need To Know; Setting Your Wap3205 V2 To Universal Repeater Mode; Universal Repeater Mode Status Screen - ZyXEL Communications WAP3205 v2 User Manual

5.3 What You Need to Know

With the exception of the WPS, Universal Repeater and Site Survey screens under Network >
Wireless LAN, other configuration screens in Universal Repeater mode are similar to the ones in
Access Point Mode. See

5.4 Setting your WAP3205 v2 to Universal Repeater Mode

To use your WAP3205 v2 as a universal repeater, see
1
Connect your computer to the LAN port of the WAP3205 v2.
2
Open a web browser such as Internet Explorer and type "http://zyxelsetup" as the web address in
3
your web browser.
Enter "1234" (default) as the password and click Login.
4
Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.
5
Note: You have to log into the Web Configurator again when you change modes. As soon
as you do, your WAP3205 v2 is already in Universal Repeater mode.
Note: The universal repeater mode IP address is always the same as the access point
mode IP address. If you changed the IP address of your WAP3205 v2 while in
access point mode, use this IP address in universal repeater mode.

5.5 Universal Repeater Mode Status Screen

Click
Chapter 5 Universal Repeater Mode
Chapter 11 on page 94
to open the status screen.
WAP3205 v2 User's Guide
through Chapter 12 on page 99
Section 2.1.1.1 on page
32
of this User's Guide.
14.