Wireless Router/Ap Troubleshooting - ZyXEL Communications WAP3205 v2 User Manual

Press the RESET button for longer than five seconds to set the WAP3205 v2 back to its factory-
3
default configurations.
If the WAP3205 v2 restarts automatically, wait for the WAP3205 v2 to finish restarting, and log in to
the Web Configurator. The password is "1234".
If the WAP3205 v2 does not restart automatically, disconnect and reconnect the WAP3205 v2's
power. Then, follow the directions above again.

13.5 Wireless Router/AP Troubleshooting

I cannot access the WAP3205 v2 or ping any computer from the WLAN.
Make sure the wireless adapter on the wireless station is working properly.
1
Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports
2
the same wireless standard as the WAP3205 v2.
Make sure your computer (with a wireless adapter installed) is within the transmission range of the
3
WAP3205 v2.
Check that both the WAP3205 v2 and your wireless station are using the same wireless and
4
wireless security settings.
Chapter 13 Troubleshooting
WAP3205 v2 User's Guide
110