Wps Screen - ZyXEL Communications WAP3205 User Manual

The following table describes the labels in this screen.
Table 25 Network > Wireless LAN > Advanced
L ABEL
Wireless Advanced Setup
Tx Power
Enable Intra-BSS
Traffic
Apply
Reset
6.7 WPS Sc re e n
Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click
Network > Wireless LAN > WPS
Fig ure 40
The following table describes the labels in this screen.
Table 26 Network > Wireless LAN > WPS
L ABEL
WPS Setup
Enable WPS
PIN Number
WPS Status
Chapter 6 Wireless LAN
DESC RIPT IO N
This field controls the transmission power of the WAP3205 v3. If there is a high density of APs in
an area, decrease the output power of the WAP3205 v3 to reduce interference with other
APs.
A Basic Service Set (BSS) exists when all communications between wireless clients or between
a wireless client and a wired network client go through one access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is enabled, wireless
client and can access the wired network and communicate with each other. When Intra-
A B
BSS is disabled, wireless client
communicate with each other.
Click to save your changes to the WAP3205 v3.
Apply
Click to reload the previous configuration for this screen.
Re se t
>
Ne two rk
DESC RIPT IO N
Click the check box to enable the WPS feature. Click again to disable it.
Ena b le WPS
This displays a PIN number last time system generated. Click
number.
WAP3205 v3 User's Guide
and can still access the wired network but cannot
A B
> tab.
Wire le ss L AN WPS
63
to generate a new PIN
G e ne ra te