Figure 3.19Usb Mass Storage Device Configuration - Advantech SOM-4463 B2 User Manual

3.2.2.16 USB Mass Storage Device Configuration
Figure 3.19 USB Mass Storage Device Configuration
 USB Mass Storage Reset Delay
This item allows users to specify the number of seconds that the POST waits for
the USB mass storage device to initialize after executing a start unit command.
 Emulation Type
If this item is set to "Auto", USB devices smaller than 530MB are emulated as
floppy drives and the remaining are emulated as hard disk drives. The "Force
FDD" option enables users to force an FDD-formatted drive to boot as an FDD
(i.e., ZIP drive).
23 SOM-4463 B2 User Manual