Device Setup & Configuration; Figure 2.3:Device Manager - Advantech PCL-818 Series User Manual

2.4 Device Setup & Configuration
The Advantech Device Manager program is a utility that allows you to set
up, configure and test your device, and later stores your settings on the
system registry. These settings will be used when you call the APIs of
Advantech Device Drivers.
Setting Up the Device
Step 1:To install the I/O device for your card, you must first run the
Device Installation program (by accessing Start/Advantech Auto-
mation/Device Manager/Advantech Device Manager ).
Step 2:You can then view the device(s) already installed on your system
(if any) on the Installed Devices list box. Since you have not
installed any device yet, you might see a blank list such as the one
below (Fig. 2-3).
PCL-818 Series User Manual
Figure 2.3: Device Manager
16