Advantech SOM-DB5830 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Computer Hardware
  5. SOM-DB5830
  6. User manual
Advantech SOM-DB5830 User Manual

Advantech SOM-DB5830 User Manual

Development board for com express type 6 pinout modules
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
SOM-DB5830
Development Board for COM
Express® Type 6 Pinout
Modules

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SOM-DB5830 and is the answer not in the manual?

Questions and answers

Related Manuals for Advantech SOM-DB5830

Summary of Contents for Advantech SOM-DB5830

  • Page 1 User Manual SOM-DB5830 Development Board for COM Express® Type 6 Pinout Modules...
  • Page 2 No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. The information provided in this manual is intended to be accurate and reliable.
  • Page 3 This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This type of cable is available from Advantech. Please contact your local supplier for ordering information.
  • Page 4 The layout checklist specifies the layout constraints and recommendations in terms of trace length, impedance, and other necessary information during the design process. Contact your nearest Advantech office for design documents and advanced technical support. SOM-DB5830 User Manual...
  • Page 5 Serial ATA cable 7P/7P, 32cm 1701100300 Flat COM port cable 1960077251T000 I/O bracket for SOM-DB5830 1910001675 Post M2.5 x 4L 2.5 x 5L 2.5 2.1 5 5 Cu Ni 1920001128 NUT M D = 5 5 2.1 3 Cu Ni...
  • Page 6 In accordance with IEC 704-1:1982 specifications, the sound pressure level at the operator’s position should not exceed 70 dB (A). DISCLAIMER: These instructions are provided according to IEC 704-1 standards. Advantech disclaims all responsibility for the accuracy of any statements contained herein. SOM-DB5830 User Manual...
  • Page 7 Do not touch any components on the CPU card or other cards while the PC is powered on. Disconnect the power before making any configuration changes. A sudden rush  of power after connecting a jumper or installing a card may damage sensitive electronic components. SOM-DB5830 User Manual...
  • Page 8 SOM-DB5830 User Manual viii...

  • Page 9: Table Of Contents

    Figure 2.2 Main Chips on Board - Top View (A2) ......6 Figure 2.3 Main Chips on Board - Top View (A3) ......7 Mechanical Drawings ................8 Figure 2.4 SOM-DB5830 Board - Top View ........ 8 Figure 2.5 SOM-DB5830 Mechanical Drawing - Side View..8 Assembly Drawing ..................9 Figure 2.6 COM Express to SOM-DB5830........
  • Page 10 Table 3.59:BIOS_DIS0/BIOS_DIS1 BIOS Disable 0/BIOS Disable 1 (A1)................ 41 Table 3.60:BIOS_DIS0/BIOS_DIS1 BIOS Disable0, BIOS Dis- able1 (A2 & A3) ............41 Table 3.61:J16, J17 SOM-DB5830 Voltage Input (VIN) Selection (A1)................41 Table 3.62:J16, J17 SOM-DB5830 Voltage Input (VIN) Selection (A2 & A3)..............42 Table 3.63:PSON1 ATX/AT Mode Selection (A1) ......
  • Page 11 Table 3.101:J14 COMe R3.0 support Type SEL (A2 & A3)..49 Chapter SOM-EA10 ..........51 SOM-EA10 ....................52 4.1.1 Connector Layout................ 52 4.1.2 Connector List................52 Table 4.1: Connector List ............52 4.1.3 SOM-EA10 Block Diagram ............52 SOM-DB5830 User Manual...
  • Page 12 SOM-DB5830 User Manual...

  • Page 13: Chapter 1 General Information

    Chapter General Information  Introduction  Functional Block Diagram...

  • Page 14: Introduction

    Introduction SOM-DB5830 is a new carrier board that complies with PICMG COM.0 Revision 3.0 Type 6 pinouts. The differences in the main features compared with that for COM.0 Revision 2.1 are listed below (refer to PICMG COM.0 Revision 3.0 specifications for further details).
  • Page 15 Serial Presence Detect is configuration information stored on a serial EEPROM chip on DRAM modules. Trusted Platform Module is chip technology designed to provide hardware-based, security-related functions. UEFI Unified Extensible Firmware Interface Watchdog Timer SOM-DB5830 User Manual...

  • Page 16: Block Diagram

    Block Diagram SOM-DB5830 User Manual...

  • Page 17: Chapter 2 Mechanical Information

    Chapter Mechanical Information  Board Information  Mechanical Drawings  Assembly Drawing...

  • Page 18: Board Information

    Board Information The main chips on the COM Express® carrier board are shown below. Figure 2.1 Main Chips on Board - Top View (A1) Figure 2.2 Main Chips on Board - Top View (A2) SOM-DB5830 User Manual...
  • Page 19 Figure 2.3 Main Chips on Board - Top View (A3) SOM-DB5830 User Manual...

  • Page 20: Mechanical Drawings

    Mechanical Drawings To obtain more details about 2D/3D models, visit the Advantech COM support web- site at http://com.advantech.com. 243.84 233.68 210.82 178.46 178.46 102.46 78.74 78.74 61.46 61.46 6.35 6.35 Figure 2.4 SOM-DB5830 Board - Top View 37.69 Figure 2.5 SOM-DB5830 Mechanical Drawing - Side View...

  • Page 21: Assembly Drawing

    Assembly Drawing These figures demonstrate the assembly order from the thermal module, COM Express Basic module to the carrier board. Figure 2.6 COM Express to SOM-DB5830 SOM-DB5830 User Manual...
  • Page 22 SOM-DB5830 User Manual...

  • Page 23: Chapter 3 Connector And Jumper Settings

    Chapter Connector and Jumper Settings...

  • Page 24: Connector And Jumper Settings

    HDMI_CONN1 PCIE-4X1_1 VGA_CONN1 PCIE-4X1_2 SATA4 COM1 SATA3 SATA2 COM2 SATA1 CAN1 LPC_PH1 SMB1 I2C1 PCIEX16_1 SYS_FAN1 SMART_FAN1 SPI_BIOS1 LVDS_INVERTER1 DCIN2 ATX1 LVDS1 DCIN1 GPIO1 SPI_CN1 Figure 3.1 Board Connector Layout (A1) Figure 3.2 Board Connector Layout (A2) SOM-DB5830 User Manual...

  • Page 25: I/O Layout

    Figure 3.3 Board Connector Layout (A3) 3.1.2 I/O Layout VGA_CONN1 Lin-In USB4 Line -Out USB5 DDI1 USB6 USB3 USB1 DDI3 USB7 DDI2 USB2 USB0 HDMI_CONN1 DISPLAYPORT1 CN3 (SPDIF) USB2.0_1 USB3.1_1 LAN0_USB1 AUDIO1 Figure 3.4 I/O Layout (A1) Figure 3.5 I/O Layout (A2) SOM-DB5830 User Manual...

  • Page 26: Led Layout (A1)

    Figure 3.6 I/O Layout (A3) 3.1.3 LED Layout (A1) SATA_LED1 CB_RESET_LED1 VDC_LED1 SLP_S3_LED1 12V_LED1 SLP_S4_LED1 5V_SB_LED1 SLP_S5_LED1 5V_LED1 3.3V_LED1 Figure 3.7 LED Layout (A1) Figure 3.8 LED Layout (A2) SOM-DB5830 User Manual...

  • Page 27: Jumper And Switch Layout

    Figure 3.9 LED Layout (A3) 3.1.4 Jumper and Switch Layout SW_HDMI_EQ1 COM_CAN_RX COM_CAN_TX SW_LPC_TPM2 SW_LPC_TPM1 BIOS_DIS0 BIOS_DIS1 CB_PWROK PSON1 LID1 Figure 3.10 Default Jumper Settings (A1) SOM-DB5830 User Manual...
  • Page 28 Figure 3.11 Default Jumper Settings (A2) Figure 3.12 Default Jumper Settings (A3) SOM-DB5830 User Manual...

  • Page 29: Connector List

    SATA Port2 Connector S/PDIF Connector SATA4 SATA Port3 Connector DISPLAYPORT1 Display Port1&2 Connector HDMI_CONN1 HDMI Connector USB2.0_1 USB 2.0 Port4~7 Connector VGA_CONN1 CRT Connector USB3.2_1 USB 3.2 Port2~3 Connector AUDIO1 AUDIO Jack Micro SD Card Connector LVDS1 LVDS Connector SOM-DB5830 User Manual...
  • Page 30 PCIe x4 slot2 SATA2 SATA Port1 Connector LVDS_INVERTER1 LVDS INVERTER Connector SATA3 SATA Port2 Connector DISPLAYPORT1 Display Port1&2 Connector SATA4 SATA Port3 Connector HDMI_CONN1 HDMI Connector VGA_CONN1 CRT Connector AUDIO1 AUDIO Jack LVDS1 LVDS Connector GSPI1 GSPI pin header SOM-DB5830 User Manual...

  • Page 31: Jumper, Switch, And Button List

    COM RX/CAN RX SEL BATLOW1 Enable battery low# SMB_ALT1 Enable SMBus alert# PCIe GFX reverse lane PEG_LAN_RV1 order PWRBTN_PH1 PWRBTN pin header SYS_RESET_PH1 SYS reset pin header SATA_ACT_PH1 SATA ACT# pin header PWR_LED_PH1 Power LED pin header SOM-DB5830 User Manual...
  • Page 32 Table 3.5: Jumper, Switch, and Button List (A2) Label Function Label Function PWROK Signal Pull SOM-DB5830 Voltage Input J16, J17 CB_PWROK Down or Floating Selec- (VIN) Selection tion COMe Module +V5SB supply PWRBTN1 Power Button PSON1 ATX / AT Mode Selection...
  • Page 33 Table 3.6: Jumper, Switch, and Button List (A3) Label Function Label Function PWROK Signal Pull SOM-DB5830 Voltage Input J16, J17 CB_PWROK Down or Floating Selec- (VIN) Selection tion COMe Module +V5SB sup- PWRBTN1 Power Button PSON1 ATX / AT Mode Selection...

  • Page 34: Switch Settings

    Dip Switch Function LID# enable LID1 LID# disable [default] Table 3.9: SW_HDMI_EQ1 HDMI Level Shifter EQ SEL Dip Switch Function EQ set to 0dB EQ set to 2dB SW_HDMI_EQ1 EQ set to 4dB EQ set to 6dB [default] SOM-DB5830 User Manual...
  • Page 35 Equalization Setting DPEQ1 Level DPEQ0 Level EQ GAIN at 4.05G Hz (dB) J19(2,1) J21(2,1) J19(2,1) J21(2,2) J19(2,1) J21(2-X) J19(2,1) J21(2-3) J19(2,2) J21(2,1) J19(2,2) J21(2,2) J19(2,2) J21(2-X) J19(2,2) J21(2-3) 10.4 J19(2,X) J21(2,1) 11.1 J19(2,X) J21(2,2) 11.7 J19(2,X) J21(2-X) 12.3 SOM-DB5830 User Manual...
  • Page 36 J23(2,1) J25(2-X) J23(2,1) J25(2-3) J23(2,2) J25(2,1) J23(2,2) J25(2,2) J23(2,2) J25(2-X) J23(2,2) J25(2-3) 10.4 J23(2,X) J25(2,1) 11.1 J23(2,X) J25(2,2) 11.7 J23(2,X) J25(2-X) 12.3 J23(2,X) J25(2-3) 12.8 J23(2,3) J25(2,1) 13.2 J23(2,3) J25(2,2) 13.6 J23(2,3) J25(2-X) 14.0 J23(2,3) J25(2-3) 14.4 SOM-DB5830 User Manual...
  • Page 37 DPEQ1 Level DPEQ0 Level EQ GAIN at 4.05G Hz (dB) 10.4 11.1 11.7 12.3 12.8 13.2 13.6 14.0 14.4 Table 3.16: USB 3.2 Gen2 Re-driver EQ Settings (A3) Equalizer setting (dB) EQA/B/C/D @2.5GHz @5GHz 12.4 10.6 14.6 SOM-DB5830 User Manual...
  • Page 38 EQ1_0 EQ0_0 EQ INDEX @4GHz @8GHz EQ1_1 EQ0_1 -0.25 -0.5 12.5 14.5 10.0 10.5 12.0 3.1.8 Connector Pin Definitions Table 3.18: GPIO1 GPIO Pin Header (A1) Signal Signal GPI0 GPO0 GPI1 GPO1 GPI2 GPO2 GPO1 GPO3 GPI3 SOM-DB5830 User Manual...
  • Page 39 Table 3.20: GSPI1 GSPI Pin Header (A3) Signal +V3.3 GSPI_CK GSPI_MOSI GSPI_CS# GSPI_MISO Table 3.21: LPC_PH1 Low-Pin Count Pin Header (A1) Signal Signal CLK33M_PH LPC_PH_AD1 ESPI_LPC_RST# LPC_PH_AD0 LPC_PH_FRAME# +V3.3 LPC_PH_AD3 LPC_PH_AD2 Pull-up via 10K ohm to +V3.3 SERIRQ_PH ESPI_LPC_RST# +V5_DUAL SOM-DB5830 User Manual...
  • Page 40 ESPI_LPC_RST# LPC_PH_AD0 LPC_PH_FRAME# +V3.3 LPC_PH_AD3 Pull-up via 10K ohm to LPC_PH_AD2 +V3.3 SERIRQ_PH ESPI_LPC_RST# +V5_DUAL Table 3.23: SYS_FAN1 System Fan Connector (A1) Signal +V12 SYS_FAN_SENSE Table 3.24: SYS_FAN1 System Fan Connector (A2 & A3) Signal +V12 SYS_FAN_SENSE SOM-DB5830 User Manual...
  • Page 41 Table 3.25: SMART_FAN1 Smart Fan Connector (A1) Signal +V_FAN FANTACH_R1 FANPWM_R Table 3.26: SMART_FAN1 Smart Fan Connector (A2 & A3) Signal +V12 FANTACH_R1 FANPWM_R Table 3.27: I C1 I C Wafer Box (A1) Signal I2C_DAT I2C_CLK +V3.3_DUAL SOM-DB5830 User Manual...
  • Page 42 I2C_DAT I2C_CLK +V3.3_DUAL Table 3.29: SMB1 SMBus Wafer Box (A1) Signal SMB_DAT SMB_CLK +V3.3_DUAL Table 3.30: SMB1 SMBus Wafer Box (A2 & A3) Signal SMB_DAT SMB_CLK +V3.3_DUAL Table 3.31: BH1 RTC Battery Connector (A1) Signal 3SMB_CLK 4+V3.3_DUAL SOM-DB5830 User Manual...
  • Page 43 Table 3.32: BH1 RTC Battery Connector (A2 & A3) Signal +VBAT_BH Table 3.33: DCIN2 Wide-Range DC Input Connector 2 (A1) Signal +VDC +VDC Table 3.34: DCIN2 Wide Range DC Input Connector2 (A2 & A3) Signal +VDC +VDC SOM-DB5830 User Manual...
  • Page 44 Table 3.35: CAN1 CAN Bus Connector (A1) Signal Signal CAN1_D- CAN1_D+ Table 3.36: CAN1 CAN Bus Connector (A2 & A3) Signal Signal CAN1_D- CAN1_D+ Table 3.37: DCIN1 Wide-Range DC Input Connector 1 (A1) Signal Signal +VDC +VDC SOM-DB5830 User Manual...
  • Page 45 Table 3.38: DCIN1 Wide-Range DC Input Connector1 (A2 & A3) Signal Signal +VDC +VDC Table 3.39: COM1 COM Port 1 Connector (A1) Signal Signal COM1_RX COM1_TX Table 3.40: COM1 COM Port1 Connector (A2 & A3) Signal Signal COM1_RX COM1_TX SOM-DB5830 User Manual...
  • Page 46 Table 3.41: SPI_CN1 SPI BIOS Pin Header (A1) Signal Signal +V3.3M_SPI_J Q_SPI_PH_CS# Q_SPI_PH_CLK Q_SPI_PH_MISO Q_SPI_PH_MOSI Table 3.42: SPI_CN1 SPI BIOS Pin Header (A2 & A3) Signal Signal +V3.3M_SPI_J Q_SPI_PH_CS# Q_SPI_PH_CLK Q_SPI_PH_MISO Q_SPI_PH_MOSI Table 3.43: COM2 COM Port 2 Connector (A1) Signal Signal COM2_RX COM2_TX SOM-DB5830 User Manual...
  • Page 47 Table 3.44: COM2 COM Port2 Connector (A2 & A3) Signal Signal COM2_RX COM2_TX Table 3.45: LVDS_INVERTER1 LVDS Inverter Connector (A1) Signal +V12_Z_LVDS LVDS_BKLT_Z_EN# LVDS_Z_VBR +V5_LVDS Table 3.46: LVDS_INVERTER1 LVDS INVERTER Connector (A2 & A3) Signal +V12_Z_LVDS LVDS_BKLT_Z_EN# LVDS_Z_VBR +V5_LVDS SOM-DB5830 User Manual...
  • Page 48 Table 3.47: LVDS1 LVDS Connector (A1) Signal Signal +VLVDS_PANEL_PWR +VLVDS_PANEL_PWR +VLVDS_PANEL_PWR +VLVDS_PANEL_PWR LVDS0_Z_D0- LVDS1_Z_D0- LVDS0_Z_D0+ LVDS1_Z_D0+ LVDS0_Z_D1- LVDS1_Z_D1- LVDS0_Z_D1+ LVDS1_Z_D1+ LVDS0_Z_D2- LVDS1_Z_D2- LVDS0_Z_D2+ LVDS1_Z_D2+ LVDS0_Z_CLK- LVDS1_Z_CLK- LVDS0_Z_CLK+ LVDS1_Z_CLK+ LVDS_Z_DDC_CLK_eDP_AUX+ LVDS_Z_DDC_DAT_eDP_AUX- EDP_HDP_A LVDS0_Z_D3- LVDS1_Z_D3- LVDS0_Z_D3+ LVDS1_Z_D3+ Pull-low via 4.7Kohm to GND LVDS1_CTRL SOM-DB5830 User Manual...
  • Page 49 Table 3.48: LVDS1 LVDS Connector (A2) Signal Signal +VLVDS_PANEL_PWR +VLVDS_PANEL_PWR +VLVDS_PANEL_PWR +VLVDS_PANEL_PWR LVDS1_Z_CLK- LVDS1_Z_CLK+ LVDS1_Z_D3- LVDS1_Z_D3+ LVDS1_Z_D2- LVDS1_Z_D2+ LVDS1_Z_D1- LVDS1_Z_D1+ LVDS1_Z_D0+ LVDS1_Z_D0- EDP_HDP_A LVDS1_CTRL LVDS_Z_DDC_CLK_eD- LVDS_Z_DDC_DAT_eD- P_AUX+ P_AUX- LVDS0_Z_CLK+ LVDS0_Z_CLK- LVDS0_Z_D3- LVDS0_Z_D3+ LVDS0_Z_D2- LVDS0_Z_D2+ LVDS0_Z_D1+ LVDS0_Z_D1- LVDS0_Z_D0- Pull-low via 4.7Kohm to LVDS0_Z_D0+ SOM-DB5830 User Manual...
  • Page 50 Signal Signal LVDS1_CTRL LVDS1_Z_CLK- LVDS1_Z_CLK+ LVDS1_Z_D0- LVDS1_Z_D0+ LVDS1_Z_D1- LVDS1_Z_D1+ LVDS1_Z_D2- LVDS1_Z_D2+ LVDS_Z_DDC_CLK_eD- LVDS_Z_DDC_CLK_eD- P_AUX+ P_AUX- LVDS1_Z_D3- LVDS1_Z_D3+ LVDS0_Z_CLK+ LVDS0_Z_CLK- LVDS0_Z_D3- LVDS0_Z_D3+ LVDS0_Z_D2- LVDS0_Z_D2+ LVDS0_Z_D1- LVDS0_Z_D1+ LVDS0_Z_D0- LVDS0_Z_D0+ EDP_HPD_A Pull-low via 4.7Kohm to GND +VLVDS_PANEL_PWR +VLVDS_PANEL_PWR +VLVDS_PANEL_PWR +VLVDS_PANEL_PWR SOM-DB5830 User Manual...
  • Page 51 Table 3.50: PWRBTN_PH1 PWRBTN Pin Header (A1) Signal PWRBTN# Table 3.51: PWRBTN_PH1 PWRBTN Pin Header (A2 & A3) Signal PWRBTN# Table 3.52: SYS_RESET_PH1 SYS Reset Pin Header (A1) Signal PM_EXTRST# Table 3.53: SYS_RESET_PH1 SYS RESET Pin Header (A2 & A3) Signal PM_EXTRST# SOM-DB5830 User Manual...
  • Page 52 Pull-up via 330 ohm to +V3.3 Table 3.56: PWR_LED_PH1 Power LED Pin Header (A1) Signal Pull-up via 330 ohm to +V5 Table 3.57: PWR_LED_PH1 Power LED Pin Header (A2 & A3) Signal Pull-up via 330 ohm to +V5 SOM-DB5830 User Manual...
  • Page 53 SPI0/SPI1 1-2 (0) 1-2 (0) Carrier Module SPI1 Module SPI0/SPI1 Table 3.61: J16, J17 SOM-DB5830 Voltage Input (VIN) Selection (A1) Function J16 1-2 Supply ATX (+V12) to VIN [default] J17 1-2 J16 2-3 Supply DCIN (+VDC) to VIN J17 2-3...
  • Page 54 Table 3.62: J16, J17 SOM-DB5830 Voltage Input (VIN) Selection (A2 & Function J16 1-2 Supply ATX (+V12) to VIN [Default] J17 1-2 J16 2-3 Supply DCIN (+VDC) to VIN J17 2-3 Table 3.63: PSON1 ATX/AT Mode Selection (A1) Function AT Mode ATX Mode [default] Table 3.64: PSON1 ATX / AT Mode Selection (A2 &...
  • Page 55 Table 3.71: J12 Carrier Board TPM Disable (A1) Function Carrier board TPM enable [default] Carrier board TPM disable Table 3.72: J12 Carrier Board TPM Disable (A2 & A3) Function Carrier Board TPM Enable [Default] Carrier Board TPM Disable SOM-DB5830 User Manual...
  • Page 56 Table 3.75: J4, J5 LVDS_PWR selection (A2 & A3) Function J5 2-3 LVDS_PWR is +V3.3 [Default] J5 1-2 LVDS_PWR is +V5 J4 2 - J5 2 LVDS_PWR is +V12 Table 3.76: J2 Normal Operation / Clear CMOS Selection (A1) Function Clear CMOS Normal operation [default] SOM-DB5830 User Manual...
  • Page 57 POWROK Signal connect to Module [Default] POWROK Signal Floating Table 3.80: J7 EDP/LVDS HPD Selection (A1) Function LVDS HPD [default] EDP HPD Table 3.81: J7 EDP / LVDS HPD Selection (A2 & A3) Function LVDS HPD [Default] EDP HPD SOM-DB5830 User Manual...
  • Page 58 COM port RX [Default] CAN BUS RX Table 3.86: J6 LVDS_Inverter Selection (A1) Function Inverter is +V5 [default] Inverter is +V12 Table 3.87: J6 LVDS_INVERTER Selection (A2 & A3) Function INVERTER is +V5 [Default] INVERTER is +V12 SOM-DB5830 User Manual...
  • Page 59 Table 3.90: J11 ESPI Reset SEL (A1) Function PLRST# [default] ESPI reset# Table 3.91: J11 ESPI Reset SEL (A2 & A3) Function PLRST# [Default] ESPI RESET# Table 3.92: J10 ESPI EN and Disable SEL (A1) Function ESPI disable ESPI EN LPC [default] SOM-DB5830 User Manual...
  • Page 60 Table 3.96: PEG_LAN_RV1 PCIe GFX Reverse Lane Order (A1) Function PCIe GFX lane reverse Normal [default] Table 3.97: PEG_LAN_RV1 PCIe GFX Reverse Lane Order (A2 & A3) Function PCIe GFX lane reverse Normal [Default] Table 3.98: SMB_ALT1 SMB_ALT# (A1) Function SMBus alert Normal [default] SOM-DB5830 User Manual...
  • Page 61 Table 3.100: J14 COMe R3.0 Support Type SEL (Type 6 / Type 10) (A1) Function Support type enable [default] Support type disable (for Type 10 module) Table 3.101: J14 COMe R3.0 support Type SEL (A2 & A3) Function Support Type enable [Default] Support Type disable SOM-DB5830 User Manual...
  • Page 62 SOM-DB5830 User Manual...
  • Page 63 Chapter SOM-EA10...
  • Page 64 Function JPCIE1 PCIe x1 Port 1 connector JPCIE2 PCIe x1 Port 2 connector JPCIE3 PCIe x1 Port 3 connector JPCIE4 PCIe x1 Port 4 connector PJP1 4P power connector PJP2 4P power connector 4.1.3 SOM-EA10 Block Diagram SOM-DB5830 User Manual...
  • Page 65 SOM-DB5830 User Manual...
  • Page 66 No part of this publication may be reproduced in any form or by any means, such as electronically, by photocopying, recording, or otherwise, without prior written permission from the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2024...

This manual is also suitable for:

Som-db5830-00a1Som-db5830-00a2Som-db5830-00a3

Table of Contents