Advantech SOM-4463D-S8B2E User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Computer Hardware
  5. SOM-4463D-S8B2E
  6. User manual
Advantech SOM-4463D-S8B2E User Manual

Advantech SOM-4463D-S8B2E User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
SOM-4463 B2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SOM-4463D-S8B2E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Advantech SOM-4463D-S8B2E

Summary of Contents for Advantech SOM-4463D-S8B2E

  • Page 1 User Manual SOM-4463 B2...
  • Page 2 No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. The information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd.
  • Page 3 Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
  • Page 4 Safety Instructions Read these safety instructions carefully. Retain this user manual for future reference. Disconnect this equipment from all AC outlets before cleaning. Use only a damp cloth for cleaning. Do not apply liquid or spray detergents. For plugged-in equipment, the power outlet socket must be located near the equipment and easily accessible.

  • Page 5: Table Of Contents

    Contents Chapter General Information ......1 Introduction ....................2 Specifications .................... 2 1.2.1 Standard System-On-Module Functions........2 1.2.2 VGA/Flat-Panel Display Interface ..........2 1.2.3 Audio Function ................2 1.2.4 LAN LED Function ................ 3 Table 1.1: LAN LED Signaling and Behavior Default Settings ..3 1.2.5 Mechanical and Environmental Specifications......
  • Page 6 Figure 3.23Password Configuration ........... 26 Advanced Chipset Settings..............27 Figure 3.24Advanced Chipset Settings ........27 3.6.1 North Bridge Chipset Configuration ..........27 Figure 3.25North Bridge Configuration........27 Figure 3.26Video Function Configuration ........28 3.6.2 South Bridge Chipset Configuration ........... 29 Figure 3.27South Bridge Configuration ........

  • Page 7: Chapter 1 General Information

    Chapter General Information This chapter provides general information about the SOM-4463 B2 CPU System on Module.  Introduction  Specifications...

  • Page 8: Introduction

    Introduction SOM-4463 B2 is an embedded CPU module that is fully compliant with the SOM- ETX form factor standard. This new CPU module supports Intel N455/D525 +ICH8M chipsets, which support PCI and ISA interfaces. In a basic form factor of 95 x 114 mm, SOM-4463 B2 provides a scalable, cost-effective, and easy-to-integrate solution that utilizes a plug-in CPU module on an application-specific customer solution board.

  • Page 9: Lan Led Function

    1.2.4 LAN LED Function Because of the variations in LAN chips, the behavior settings for the SOM-4463 B2 LAN LED have been changed, as shown in the table below. Table 1.1: LAN LED Signaling and Behavior Default Settings ETX-X4 Conn. Pin-out SOM-4463 B1 LED Indicator SOM-4463 B2 LED Indicator D10 (LILED#) LINK (10/100) LINK (100)
  • Page 10 SOM-4463 B2 User Manual...

  • Page 11: Chapter 2 Mechanical Information

    Chapter Mechanical Information This chapter provides connector information and mechanical draw- ings.  Connector Information  Mechanical Drawings...

  • Page 12: Board Connectors

    Figure 2.1 SOM-4463 B2 Connector Locations Pin Assignments for X1/2/3/4 Connectors  For information about the pin assignments for X1/2/3/4 connectors, please refer to the SOM-ETX Design and Specification guide available for download at: http://www.advantech.com/COM_Design_Support_Services/documentdown- load.aspx Board Mechanical Drawings 2.2.1 Front Side [Unit: mm] Figure 2.2 SOM-4463 B2 Front Side...

  • Page 13: Rear Side

    2.2.2 Rear Side [Unit: mm] Figure 2.3 SOM-4463 B2 Rear Side SOM-4463 B2 User Manual...
  • Page 14 SOM-4463 B2 User Manual...

  • Page 15: Chapter 3 Bios Setup Information

    Chapter BIOS Setup Information This chapter details the basic BIOS settings.  Main Setup  Advanced Setup  PCIPnP Setup  Boot Setup  Security Setup  Chipset Setup...

  • Page 16: Introduction

    Introduction AMIBIOS has been integrated into numerous motherboards for over a decade. With the AMIBIOS Setup program, users can modify the BIOS settings and control various system features. This chapter describes the basic navigation of the SOM-4463 B2 BIOS setup screens. Figure 3.1 Setup Program Initial Screen AMI’s BIOS ROM features a built-in setup program that allows users to modify the basic system configuration.

  • Page 17: Entering Setup

    Entering Setup The BIOS is activated immediately after the computer is powered on. The BIOS reads the system information contained in the CMOS and initiates the system check and configuration process. Next, the BIOS identifies and launches an operating sys- tem located on one of the disks before turning over control to that operating system.

  • Page 18: Advanced Bios Features Setup

    3.2.2 Advanced BIOS Features Setup Select the Advanced tab from the SOM-4463 B2 setup screen to enter the Advanced BIOS setup screen. Select any item in the left frame of the screen, for example, “CPU Configuration”, to open the submenu for that item. Users can select an Advanced BIOS setup option by highlighting it using the <Arrow>...
  • Page 19  Execute-Disable Bit Capability This item allows users to enable or disable the No-Execution page protection technology.  Hyper Threading Technology This item allows users to enable or disable Intel® Hyper Threading technology. Intel® SpeedStep Technology  When this item is disable, the CPU runs at the default speed, if enabled, the CPU speed is controlled by the operating system.
  • Page 20  Hard Disk Write Protect Enable or disable device write protection. This is only effective if the device is accessed through the BIOS.  IDE Detect Time Out (Sec) This item allows users to set the time out value for ATA/ATAPI device detection. ...
  • Page 21 3.2.2.4 Super I/O Configuration Figure 3.7 Super I/O Configuration  Onboard Floppy Controller This item allows users to enable or disable the onboard floppy controller.  Floppy Drive Swap This item allows users to enable or disable the floppy drive swap function. ...
  • Page 22 3.2.2.5 Hardware Health Configuration Figure 3.8 Hardware Health Configuration  ACPI Critical Shutdown Temp This item allows users to set the CPU system shutdown temperature for the ACPI OS.  System / CPU Temperature +5 V / +5 VSB / VBAT 3.2.2.6 ACPI Settings Figure 3.9 ACPI Settings...
  • Page 23 3.2.2.7 General ACPI Configuration Figure 3.10 General ACPI Configuration  Suspend Mode This item allows users to select the ACPI state used for system suspend.  Report Video on S3 Resume This item allows users to invoke VGA BIOS POST on S3 / STR resume. 3.2.2.8 Advanced ACPI Configuration Figure 3.11 Advanced ACPI Configuration...
  • Page 24  ACPI APIC Support This item allows users to include APIC table pointers in RSDT pointer lists.  AMI OEMB Table This item allows users to include OEMB table pointers in R(x)SDT pointer lists.  Headless Mode This item allows users to enable or disable Headless mode through ACPI. 3.2.2.9 Chipset ACPI Configuration Figure 3.12 Chipset ACPI Configuration...
  • Page 25 3.2.2.10 AHCI Configuration Figure 3.13 AHCI Configuration  AHCI Port 0 / Port 1 When setup is initiated, the BIOS auto detects the presence of IDE devices and displays their status. 3.2.2.11 APM Configuration Figure 3.14 APM Configuration Power Management / APM ...
  • Page 26 This item allows users to specify whether the system is powered on, off, or enters suspend mode when the power button is pressed. The following options are also available:  Video Power Down Mode Powers down video in suspend or standby mode. Hard Disk Power Down Mode ...
  • Page 27 3.2.2.13 MPS Configuration Figure 3.16 MPS Configuration  MPS Revision This item allows users to select MPS revision. 3.2.2.14 Smbios Configuration Figure 3.17 Smbios Configuration  Smbios Smi Support SMBIOS SMI wrapper support for PnP function 50 - 54h. SOM-4463 B2 User Manual...
  • Page 28 3.2.2.15 USB Configuration Figure 3.18 USB Configuration  Legacy USB Support This item allows users to enable legacy USB support. The “Auto” option dis- ables legacy support if no USB devices are connected.  USB 2.0 Controller Mode This item allows users to choose between hi-speed (480 Mbps) or full-speed (12 Mbps) mode.
  • Page 29 3.2.2.16 USB Mass Storage Device Configuration Figure 3.19 USB Mass Storage Device Configuration  USB Mass Storage Reset Delay This item allows users to specify the number of seconds that the POST waits for the USB mass storage device to initialize after executing a start unit command. ...

  • Page 30: Advanced Pci/Pnp Settings

    Advanced PCI/PnP Settings Select the PCI/PnP tab from the SOM-4463 B2 BIOS Setup screen to enter the PnP BIOS Setup screen. Users can select a PnP BIOS Setup option by highlighting it using the <Arrow> keys. All PnP BIOS Setup options are described in this section. The PnP BIOS Setup screen is shown below.

  • Page 31: Boot Settings

     DMA Channel 0 / 1 / 3 / 5 / 6 / 7 When set to “Available”, the system specifies that DMA is available for use by PCI / PnP devices. When set to “Reserved”, the system specifies that DMA is reserved for use by legacy ISA devices.

  • Page 32: Security Setup

     Quick Boot This item allows the BIOS to skip certain tests when booting, reducing the time required to boot the system.  Quiet Boot If this option is set to “Disabled”, the BIOS displays the standard POST mes- sages. If set to “Enabled”, an OEM logo is displayed instead of POST mes- sages.

  • Page 33: Advanced Chipset Settings

     Boot Sector Virus protection The boot sector virus protection function will warn users if any program tries to write to the boot sector. Advanced Chipset Settings Figure 3.24 Advanced Chipset Settings 3.6.1 North Bridge Chipset Configuration Figure 3.25 North Bridge Configuration ...
  • Page 34  Memory Hole This item allows users to reserve 15 ~ 16MB of memory for ISA devices.  Initiate Graphic Adapter This item allows users to specify which graphics controller to use as the primary boot device.  Internal Graphics Mode Select This item allows users to specify the amount of system memory that can be used by the internal graphics device.

  • Page 35: South Bridge Chipset Configuration

    3.6.2 South Bridge Chipset Configuration Figure 3.27 South Bridge Configuration  USB Functions Disabled, 2 USB Ports, 4 USB Ports  USB 2.0 Controller This item allows users to enable or disable the USB 2.0 controller.  HDA Controller This item allows users to enable or disable the HDA controller. ...

  • Page 36: Exit Options

    Exit Options Figure 3.28 Exit Options  Save Changes and Exit After completing the system configuration, select this option to save changes and exit the BIOS setup menu. Next, reboot the computer to implement all sys- tem configuration parameters. Select the “Save Changes and Exit” option from the Exit menu and press <Enter>.
  • Page 37 but not maximum performance. Users are advised to select fail-safe defaults if experiencing system configuration problems. Select the “Load Fail-Safe Defaults” option from the Exit menu and press <Enter>. This generates the following message: Load Fail-Safe Defaults? [OK] [Cancel] Select “OK” to load fail-safe defaults. SOM-4463 B2 User Manual...
  • Page 38 SOM-4463 B2 User Manual...

  • Page 39: Chapter 4 Driver Installation

    Chapter Driver Installation This chapter provides driver installation information.  Driver Introduction  Driver Installation...

  • Page 40: Driver Introduction

    Step 5- Install IT8888 PCI to ISA Driver Note! For Windows XP Embedded, Windows CE 5.0, and Linux support, please contact an Advantech sales representative or technical person- nel. Note! A Windows XP update may be required to enable USB 2.0 function.

  • Page 41: Appendix A Watchdog Timer

    Appendix Watchdog Timer This appendix provides informa- tion about the watchdog timer programming functions.  Programming the Watchdog Timer...

  • Page 42: Programming The Watchdog Timer

    Programming the Watchdog Timer Sample code for programming the watchdog timer function: ----------------------------------------------------------------------------------- Enter the extended function mode, interruptible double-write | ----------------------------------------------------------------------------------- MOV DX,2EH MOV AL,87H OUT DX,AL OUT DX,AL ----------------------------------------------------------------------------- Configured logical device 8, configuration register CRF6 | ----------------------------------------------------------------------------- MOV DX,2EH MOV AL,2BH OUT DX,AL...
  • Page 43 ; Exit the extended function mode | ;------------------------------------------ MOV DX,2EH MOV AL,AAH OUT DX,AL SOM-4463 B2 User Manual...
  • Page 44 SOM-4463 B2 User Manual...

  • Page 45: Appendix B System Assignments

    Appendix System Assignments This appendix details the system resource allocation.  System I/O Ports  DMA Channel Assignments  Interrupt Assignments  System Memory Map...

  • Page 46: System I/O Ports

    System I/O Ports Table B.1: System I/O Ports I/O Address (Hex) 0000 - 000F Direct memory access controller 0000 - 0CF7 PCI bus 0010 - 001F Motherboard resources 0020 - 0021 Programmable interrupt controller 0022 - 003F Motherboard resources 0040 - 0043 System timer 0044 - 005F Motherboard resources...

  • Page 47: Dma Channel Assignments

    Table B.1: System I/O Ports 0A00 - 0A0F Motherboard resources 0A79 - 0A79 ISAPNP Read Data Port 0D00 - FFFF PCI bus C800 - C807 Intel Graphics Media Accelerator 3150 C880 - C89F Intel ICH8 Family USB Universal Host Controller - 2831 CC00 - CC1F Intel ICH8 Family USB Universal Host Controller - 2830 D080 - D08F...

  • Page 48: Interrupt Assignments

    Interrupt Assignments Table B.3: Interrupt Assignments Interrupt# Interrupt source IRQ 0 System timer IRQ 1 Standard 101/102-key or Microsoft Natural PS/2 keyboard IRQ 2 Available IRQ 3 Communications Port (COM 2) IRQ 4 Communications Port (COM 1) IRQ 5 Available IRQ 6 Available IRQ 7...

  • Page 49: System Memory Map

    System Memory Map Table B.4: System Memory Map Address range (Hex) Device 00000000 - 0009FFFF System board 000A0000 - 000BFFFF Intel Graphics Media Accelerator 3150 000A0000 - 000BFFFF PCI Bus 000C0000 - 000CFFFF System board 000D0000 - 000DFFFF PCI Bus 000E0000 - 000FFFFF System board 00100000 - 3F6FFFFF...
  • Page 50 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion from the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2014...

This manual is also suitable for:

Som-4463 b2Som-4463n-s6b2e

Table of Contents