9 - 2
DS6708 Digital Scanner Product Reference Guide
Connecting Using Wand Emulation
To perform Wand Emulation, connect the digital scanner to a mobile computer, or a controller which collects the
wand data and interprets it for the host.
Wand Emulation Connection
Figure 9-1
Wand Port
Wand Emulation Connection for Scanner with Base
Figure 9-2
NOTE Interface cables vary depending on configuration. The connectors illustrated in
9-2are examples only. The connectors may be different than those illustrated, but the steps to connect the
scanner are the same.
Attach the modular connector of the Wand Emulation interface cable to cable interface port on the digital
1.
scanner (see
Installing the Interface Cable on page
Connect the other end of the Wand Emulation interface cable to the wand port on the mobile computer or
2.
controller.
Mobile Computer
Wand Port
Mobile Computer
Interface Cable
Interface Cable
1-3).
Figure 9-1
and
Figure