Restoring Player Setup Menu Default Settings; Displaying The Image On An External Device - HP Pavilion DV1010 Series Hardware And Software Manual

Restoring Player Setup Menu Default
Settings
To restore all default settings on the Player Setup menu:
1. While the notebook is in QuickPlay, press
the Player Setup menu.
2. Select the General Settings menu, and then press
3. Select Reset to Default, and then press
4. To close the menu display, press

Displaying the Image on an External Device

In most configurations, when the notebook is in QuickPlay and an
optional VGA monitor is connected to the monitor port, press the
hotkey to toggle the image between the notebook display
fn+f4
only and simultaneous display on both the notebook and the
monitor.
When the notebook is in QuickPlay DVD mode and TV-Out is
enabled on the Player Setup menu, the image is displayed on
the connected external device only and cannot be switched to
the notebook display.
Enabling TV-Out sets the notebook to transmit S-Video or
composite video signals to an optional external device, such as a
monitor or a television. For more information and instructions for
enabling TV-Out, see the
Preferences"
When the notebook is in Windows, the
additional functions. For information about using the
and other hotkeys in both QuickPlay and Windows, see the
"Hotkeys"
Hardware and Software Guide
section earlier in this chapter.
section in Chapter 2, "QuickPlay."
esc.
"Setting TV-Out and TV System
fn+f4
QuickPlay
to display
fn+esc
ok.
ok.
hotkey has
hotkey
fn+f4
2–37