Selecting Power Conservation Settings - HP Pavilion DV1010 Series Hardware And Software Manual

Power
■
Use optional, externally powered speakers instead of the
internal speakers whenever possible. When you must use
the internal speakers, minimize system volume. Volume can
be adjusted with the volume buttons.
■
Minimize screen brightness. To decrease screen brightness,
press the
the
■
If you leave your work
❏
❏

Selecting Power Conservation Settings

You can set and use the following power conservation settings
only while the notebook is in Windows.
To set the notebook to use less power in Windows:
■
Select a short wait for the screen saver and select a screen
saver with minimal graphics and motion. To select a screen
saver and a screen saver wait time, select Start > Control
Panel > Appearance and Themes > Display > Screen
Saver tab, and then follow the instructions on the screen.
■
Select or create a power scheme that minimizes power use.
For more information about using power schemes, see the
"Using Power Schemes"
4–30
hotkey. To increase screen brightness, press
fn+f7
hotkey.
fn+f8
While the notebook is in Windows, initiate Standby or
Hibernation, or shut down the notebook.
While the notebook is in QuickPlay, turn off the notebook.
section earlier in this chapter.
Hardware and Software Guide