HP Pavilion DV1010 Series Hardware And Software Manual page 130

Multimedia
Setting Audio Output Preferences
In both Windows and QuickPlay, the notebook is set by default to
transmit analog audio signals through the 2 audio-out
(headphone) jacks.
The notebook can also transmit S/PDIF digital audio signals
through the audio-out jacks. To transmit S/PDIF signals to
an external device, the system must include an optional
Expansion Base or an optional HP xc2000 Notebook All-in-One
Media Cable. Refer to the manufacturer's documentation for
more information about these devices.
To set the notebook to transmit S/PDIF audio signals while the
notebook is in QuickPlay, you must set an S/PDIF preference on
the Player Setup menu. An audio preference set on the Player
Setup menu is retained after you close QuickPlay, but can be
changed at any time.
To set an audio preference for QuickPlay, the notebook must be in
QuickPlay:
■
To open QuickPlay while the notebook is off, press the DVD
button, illustrated below
■
To switch the notebook from Windows to QuickPlay, shut
down or hibernate Windows, and then press the DVD button
to open QuickPlay.
5–6 Hardware and Software Guide