Initiating or Restoring from Hibernation
Hibernation cannot be initiated unless it is enabled. Hibernation
is enabled by default. To verify that Hibernation remains enabled,
select Start > Control Panel > Performance and
Maintenance > Power Options > Hibernate tab. If Hibernation
is enabled, the Enable Hibernation check box is selected.
Task
Initiate Hibernation
from Windows.
✎
Hibernation
cannot be
initiated from
QuickPlay.
Allow the system to
initiate Hibernation
from Windows.
✎
Hibernation
cannot be
initiated from
QuickPlay.
Hardware and Software Guide
Procedure
In Windows XP Home, select
Start >Turn Off Computer.* Then
hold down shift as you select the
Stand By button.
In Windows XP Professional, select
Start > Turn Off Computer >
Hibernate.* (If Hibernate is not
displayed, press the down arrow, and
then select Hibernate from the
drop-down list.)
No action is required. If the notebook
is running on battery power and
Hibernation is enabled, the system
initiates Hibernation
■ After 30 minutes of notebook
inactivity.
■ Whenever the battery pack
reaches a critical low-battery
condition.
Power
Result
■ Power/standby
light and power
button light are
turned off.
■ Screen is
cleared.
■ Power/standby
light and power
button light are
turned off.
■ Screen is
cleared.
(Continued)
4–15