Display Description - Kyocera FS-1030MPF Service Manual

Item No.
U601 Initializing permanent data
Description
Initializes software switches on the FAX control PWB according to the destination and OEM.
Purpose
To initialize the FAX control PWB without changing user registration data.
Method
1. Press the start key.
2. Select [Execute]. The screen for entering the destination code and OEM code is displayed.
3. Select [Country Code] and enter a destination code using the numeric keys (refer to the des-
tination code list on page 1-3-22 for the destination code).
4. Press the start key.
There is no operation necessary on this screen.
The destination code and the OEM code are displayed with the values currently set.
5. Press the start key. Data initialization starts. To cancel data initialization, press the back key.
6. After data initialization, the entered destination, OEM codes and ROM version are displayed.
A ROM version displays three kinds, application, boot, and IPL.
U603 Setting user data 1
Description
Makes user settings to enable the use of the machine as a fax.
Purpose
To be run after installation of the facsimile kit if necessary.
Method
1. Press the start key.
2. Select [LINE TYPE] and press the start key.
3. Select the setting using the cursor up/down keys.
Display
DTMF
10PPS
20PPS
* : Initial setting: DTMF
4. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
DTMF
10 PPS
20 PPS
1-3-23
2MH/2MJ/2MK/2ML