Kyocera FS-1030MPF Service Manual page 62

Item No.
U630 Setting communication control 1
Description
Makes settings for fax transmission regarding the communication.
Method
1. Press the start key.
2. Select the item to be set using the cursor up/down keys.
Display
TX SPEED
RX SPEED
TX ECHO
RX ECHO
Setting the communication starting speed
Sets the initial communication speed when starting transmission. When the destination unit has
V.34 capability, V.34 is selected for transmission, regardless of this setting.
1. Select the setting using the cursor up/down keys.
Display
14400bps/V17
9600bps/V29
4800bps/V27ter
2400bps/V27ter
* : Initial setting: 14400bps/V17
2. Press the start key. The setting is set.
Description
Description
Sets the communication starting speed.
Sets the reception speed.
Sets the waiting period to prevent echo problems at the
sender.
Sets the waiting period to prevent echo problems at the
receiver.
Description
V.17, 14400 bps
V.17, 9600 bps
V.27ter, 4800 bps
V.27ter, 2400 bps
1-3-31
2MH/2MJ/2MK/2ML