Developer Section; Detaching And Refitting The Developer Unit - Kyocera FS-1030MPF Service Manual

1-5-5 Developer section

(1) Detaching and refitting the developer unit

Procedure
1. Open the front cover.
2. Remove the developer unit.
3. Check or replace the developer unit and
refit all the removed parts.
NOTE:
When the periodic maintenance
(replacing the maintenance kit, see
page 2-4-4), perform following mainte-
nance modes.
1. U251 Clearing the maintenance count
(see page 1-3-14)
1-5-27
2MH/2MJ/2MK/2ML
Figure 1-5-40
Developer
unit
Front cover