Kyocera FS-1030MPF Service Manual page 253

Environment
Error message for device error
Duplex operation for specified
paper type
(Prepunched, Preprintedand Letter-
head)
Default operation for PDF direct
printing
a. Characters higher than 127 are printed regardless of the C8 value. However, setting C8 to 0 does not
print character code 160.
*. Ignored in some emulation modes.
Para
meter
Y3 0:Not Detect
1:Detect
Y4 0:Off
1:On
Y5 0: Enlarges or reduces the image to fit in the
current paper size. Loads paper from the cur-
rent paper cassette.
1: Through the image. Loads paper which is
the same size as the image.
2: Enlarges or reduces the image to fit in the
current paper size. Loads Letter, A4 size paper
depending on the image size.
3: Through the image. Loads Letter, A4 size
paper depending on the image size.
8: Through the image. Loads paper from the
current paper cassette.
9: Through the image. Loads Letter, A4 size
paper depending on the image size.
10: Enlarges or reduces the image to fit in the
current paper size. Loads Letter, A4 size paper
depending on the imagesize.
2-4-12
2MH/2MJ/2MK/2ML
Values
Factory
setting
127
0
0