4. Press START/COPY, then use
5. Press START/COPY.
6. Press START/COPY again, then use the numeric buttons to enter the number of
times you want the unit to redial (1 to 4 times).
7. Press START/COPY.
8. Press START/COPY again, then use the numeric buttons to enter the time
interval between rediallings. (2 to 99 minutes)
9. Press START/COPY.
Chapter 5
The default setting is ON.
The default setting is twice.
The default setting is two minutes.
or
to select ON.
REDIAL TIMES
02TIMES
REDIAL INTERVAL
02MIN.
TX ERROR RESEND
ON
Sending Faxes
5-27