Table of Contents
Advertisement
Setting the Scanning Contrast
Contrast is the difference in brightness between the lightest and darkest parts of a
printed document. You can adjust the contrast the FAX-L260i uses when scanning
documents to be sent. STANDARD is the default setting and is adequate for most
documents. To darken a light original, set to DARKER; to lighten dark originals, use
LIGHTER.
1. Press FUNCTION.
2. Use
3. Press START/COPY, then use
4. Press START/COPY.
5. Press
6. Press START/COPY to save your selection, then press STOP to return to
standby mode.
Chapter 5
or
to select USER SETTINGS.
The currently set scanning contrast is displayed.
or
to select the scanning contrast you wish to set.
You can select STANDARD, LIGHTER, or DARKER.
You can cancel and return to standby mode by pressing the STOP button
any time before pressing the START/COPY button in step 6.
FUNCTION
USER SETTINGS
or
to select SCAN CONTRAST.
SCAN CONTRAST
STANDARD
08/10 1998 16:21
Sending Faxes
5-15
Advertisement
Table of Contents
