Loading Recording Paper - Canon Fax-L260i User Manual

Loading Recording Paper

When the message LOAD PAPER appears in the LCD display, you need to add
paper to the sheet feeder. Here are a few tips you should follow when you load paper
into the sheet feeder.
Use A4-size paper.
Use standard 64–90 g/m
The sheet feeder holds up to 100 sheets of standard weight paper* (maximum 10
mm stack height).
Let the paper run out before you refill the sheet feeder. Avoid mixing new paper
with paper remaining in the sheet feeder.
Stack the paper so that the top and bottom edges and sides are straight and even
before placing it in the sheet feeder.
Do not print on both sides of the paper. Doing so may cause several sheets to
feed into the unit at the same time.
Do not use damp, curled, wrinkled, or torn paper as these can cause paper jams
or poor print quality.
Highly textured or extremely smooth or shiny paper does not print well.
The laser printing process uses high temperatures to fuse toner to the paper. Use
paper that will not melt, vaporise, discolour, or emit dangerous fumes at
temperatures near 170 C. For example, do not use vellum paper in a laser printer.
Make sure any letterhead or coloured paper you use can withstand high
temperatures.
Make sure the paper is free of dust, lint, and oil stains.
To keep the paper from curling, do not open paper packs until you are ready to
use the paper. Store unused paper from opened packs in a cool, dry location in
the original packaging.
Your FAX-L260i is factory-set to use A4-size paper. If you wish to use letter- or
legal-size paper, you must change the setting from the FAX PRINTER menu.
See Chapter 11, "The Menu System" for more details on changing the setting.
Do not load paper in the sheet feeder when the unit is printing.
* 75 g/m 2
2-32 Setting Up Your FAX-L260i
2
paper
weight paper.
Chapter 2